Abstract:The ballistic response of armor has been widely used to evaluate its feasibility and advantages as a protective structure. To obtain the ballistic performance and ballistic limitations of composite armor, a type of ultra-high molecular weight polyethylene (UHMWPE) composite armor is designed, which is composed of UHMWPE laminates and steel face sheets of Q235. The total thickness of the armor is 53 mm, with an in-plane dimension of 300 mm × 300 mm. Then, an experimental study of the ballistic impact response of composite armor subject to a typical ogive-nose projectile was carried out. In the velocity range of 501.1 to 1026.1 m/s, the 14.5 mm caliber armor-piercing projectile could penetrate through the composite armor. At the velocity of 433.3 m/s, the A-P projectile was embedded in the armor, leaving a bulge mark on the back sheet. Therefore, 467.2 m/s is taken as the ballistic limit of the armor under the impact of the ogive-nose projectile. In addition, a corresponding numerical simulation model is also established to predict the ballistic limit of the projectile. The numerical predictions are consistent with the experimental results. The ballistic limit obtained from the numerical simulation results is 500 m/s, which is acceptable with a relative error of 7.02%. The failure mechanism of the composite armor is also obtained. Petaling is the main dominant failure mode for both face sheets, while delamination and shear failure dominate the penetration process of UHMWPE laminates. Finally, the perforation mechanism of composite armor under the impact of an A-P projectile is analyzed with theoretical models to predict the residual velocity, the work performed during the perforation, and the resisting stress of σs in the cavity-expansion model. The experimental and numerical simulation results can provide necessary data in the analysis of the composite structure's dynamic response under the impact of sharp head penetrators. The research results present the ballistic performance, failure mechanism, and ballistic limit of the composite armor under the impact of a typical ogive-nose projectile, which can be significant in the design of composite armor in the areas of ship shield, fortifications protection, and bulletproof structures against threats from sharp head penetrators.

Experimental Study on Ballistic Performance for Multi-hole Armor Steel Plates Against the 7.62mm Armor Piercing Projectile

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Research on anti-penetration performance of composite armor of steel/composite materials

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Ballistic Limit of High-Strength Steel and Al7075-T6 Multi-Layered Plates Under 7.62-mm Armour Piercing Projectile Impact

Numerical investigation on dynamic damage behavior of a novel N-shaped perforated armor plate under ballistic impact

Ballistic performance of spherical fragments penetrating PCrNi3MoV target plates

Ballistic Limit of UHMWPE Composite Armor under Impact of Ogive-Nose Projectile

Ballistic performances of Ramor 500, Armox Advance and Hardox 450 steels under monolithic, double-layered, and perforated conditions

On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

Experimental investigation on the ballistic performance of double-layered plates subjected to impact by projectile of high strength

Experimental investigation on the ballistic resistance of monolithic and multi-layered plates against hemispherical-nosed projectiles impact

Study on the Penetration Performance of a 5.8 mm Ceramic Composite Projectile

Effect of Lode angle and projectile diameter on the ballistic resistance of 6061-T651 aluminum alloy plates struck by hemispherical nosed projectile

Dynamic Response of UHMW-PE Composite Armors under Ballistic Impact of Blunt Projectiles

Simulation and experimental study of fragment penetration into armored steel plate

Experimental and Numerical Investigation on the Perforation Resistance of Double-Layered Metal Shield under High-Velocity Impact of Armor-Piercing Projectiles

Ballistic analysis of high-performance armor steel by numerical simulation