High-velocity impact performance of AA 7475-T7351 aluminum square plates struck by steel projectiles: Assessing leakage limit velocity
Pouria. B. Ataabadi,Caio Magno de Assunção,Purnashis Chakraborty,Marcilio Alves
DOI: https://doi.org/10.1016/j.ijimpeng.2024.104913
IF: 4.592
2024-05-01
International Journal of Impact Engineering
Abstract:This paper presents numerical and experimental findings of high-velocity impact tests conducted on thin AA 7475-T7351 aluminum plates subjected to the impact of small cubical and spherical projectiles. The investigation includes an examination of the influence of different impact angles, namely edge-on, corner-on, and face-on orientations, on the target performance. Following each impact test, the damaged plates underwent a leakage test, to determine the leakage threshold caused by the impact event. To gain a deeper insight into the failure modes and penetration mechanisms of thin-walled aluminum plates, finite element models were developed for various impact scenarios. The results revealed that both the shape and orientation of the projectile significantly impact the ballistic and liquid leakage limit velocities of targets. Notably, the cubical projectile exhibited lower ballistic and leakage limits than the spherical projectile. In terms of the leakage limit, a clear correlation was identified between the sharpness of the projectile's nose and leakage limit velocity. As the projectile's nose became sharper, the consistent trend was a decrease in leakage limit velocity i.e. the corner-on impact orientation (having the sharpest nose) exhibited the lowest leakage limit velocity, while the face-on impact orientation (having a blunt nose) displayed the highest leakage limit velocity. However, in contrast to the leakage limit velocity, a definitive relationship between the projectile nose sharpness and ballistic limit velocities was not observed. This is evident as the corner-on impact orientation, associated with the sharpest nose, registered the highest ballistic limit velocity, while the edge-on impact orientation, with an intermediate nose sharpness, recorded the lowest ballistic limit velocity.
engineering, mechanical,mechanics