Abstract:Sediment composition and bed morphology are two crucial factors that can significantly affect the dynamics of debris mixtures and attendant entrainment characteristics. In this study, three types of bed sediments with varying contents of coarse and fine grains and different bed longitudinal transition angles were designed for our small-scale flume experiments. The profound deceleration, redirection, and regime transition of debris flows when moving over the transition sites were detected based on experimental observations and measurements. For the coarse-grained bed sediment (CBS) and fine-grained bed sediment (FBS), high flow noses developed with an exploded or wedge-shaped front. For the wide-grading bed sediments (WBS), the debris mixture can be regarded as a tabular flow. These effects on debris flow dynamics became more pronounced as the bed transition angle increased. The measured pore pressures decreased successively for the CBS, WBS, and FBS, which may be attributed to the varying hydraulic permeability of different bed sediments. A possible mechanism of pore pressure generation in non-uniform erodible beds is proposed, resulting from local pore contractions within both the debris flow and bed sediments. The spatial distribution of the entrained depths for different bed sediment compositions is similar when the initial bed morphology is plain. As the transition angle increased, the entrained depths varied significantly as obvious erosion holes emerged, which may be ascribed to the intense frontal interactions between the flowing mixture and static bed material and the propagation of shock waves. A comparison between the calculated erosion rates of five mechanical models and the measured global time average of erosion depth proved that the two-phase erosion model (Pudasaini and Fisher, 2020), which comprises both the erosion of solid and fluid phases, is appropriate for describing the eroding forces of debris flows in erodible beds with slight bed longitudinal transitions.

Laboratory experiments on debris flow processes in sharp channel bends

Discharge evolution law of debris flow based on a sharp bend physical modeling test

Experimental assessment of channel narrowness effects on debris-flow erosion

Shedding effects of sediment composition and bed morphology on debris flow dynamics and entrainment mechanism: Insights from laboratory experiments

Slope Erosion Induced by Surges of Debris Flow: Insights from Field Experiments

Lateral Shear Stress Calculation Model Based on Flow Velocity Field Distribution from Experimental Debris Flows

Numerical Simulation of the Transportation of Cohesive Bank-Collapsed Materials in a Sharply Curved Channel

Experiment on Effect of Artificial Roughness on Water Flow Characteristic

The Role of Bank Erosion on the Initiation and Motion of Gully Debris Flows

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Experimental study on near-bed flow turbulence of sinuous channel with downward seepage

Experimental study of erodible bed scoured by the debris flow in the narrow-steep gully

Experimental study of debris-flow entrainment over stepped-gradient beds incorporating bed sediment porosity

Debris flow enlargement from entrainment: A case study for comparison of three entrainment models

Numerical Simulation And Research On The Electroosmotic Flow In The Curve Channel

Numerical Computations of the Flow in A Finite Diverging Channel

Experimental investigation of internal erosion behaviours in inclined seepage flow

Flow Patterns and Bed Deformation in A Meandering Channel with Different Flow Conditions

Modeling of liquid-solid flow erosion in curved pipes of gradually varying cross section

Incipient Motion of Riverbank Sediments with Outflow Seepage

Mechanism of downcutting erosion of debris flow over a movable bed