Abstract:Cu and unoxidized graphene composite films were prepared by electroplating under room temperature. Graphene was added to the electrolyte of Cu to form composite materials to improve the performance of Cu for interconnection. Composite electrolyte containing high concentration of graphene (up to 0.5 g/L) was prepared by adding CTAB as surfactant. And ultrasound was also used to increase dispersion degree and reduce graphene agglomeration in electrolyte. Average coefficient of thermal expansion (CTE) of the composite films determined by thermo-mechanical analysis (TMA) shows a decrease from 17.3 ppm/K to 14.2 ppm/K from 260 K to 320 K, which reduce CTE by 18 % compared with Cu. CTE of the composite materials can be reduced to 10 ppm/K at 243 K, which is only 60 % of CTE of Cu. The thermal conductivity of the composite materials measured by phase sensitive transient thermo-reflectance (PSTTR) technique shows an improvement from 385 W/m.K to 468 W/m.K. CTE and thermal conductivity of the composite materials both decrease with the increase of current density. And they also both increase with the increase of graphene concentration. The composite materials also show good mechanical properties. The average hardness is 2.5 GPa, which is about 2 times of Cu. And the average elastic modulus is 145 GPa, which is 38 % higher than that of Cu. The resistivity of the composite materials is basically equivalent to that of pure Cu. Result of the experiment proved that the composite materials have better performance under low temperature conditions. The improvement of material properties makes composite materials have good application prospects for 3D interconnection in the near future.

Facile fabrication of layer-structured graphene/copper composite with enhanced electrical and mechanical properties

Attaining Exceptional Electrical Conductivity in Cu-Fe Composite by Powder Rolling Strategy

A novel approach to fabricate layered RGO/Cu composites with excellent mechanical properties

Fabrication and characterization of copper and copper alloys reinforced with graphene

Building a Layer-Structured Aluminum/Graphene Composite with Significant Improvement in Electrical Conductivity

A high strength and high electrical conductivity graphene/Cu composite with good high-temperature stability

Surface modification on copper particles toward graphene reinforced copper matrix composites for electrical engineering application

Enhanced Electrical Conductivity and Tensile Strength of Cu/Single-Layer Graphene/Cu Nanomaterials

The improved softening resistance and high electrical conductivity of the 3D graphene enhanced copper-based composite fabricated by liquid carbon source

In-situ generated graphene from wheat flour for enhancing mechanical and electrical properties of copper matrix composites

Superior electrical conductivity-strength combination of an in-situ fabricated La 2 O 3 -doped copper/graphene composite conductor

Copper coated graphene reinforced aluminum composites with enhanced mechanical strength and conductivity

In-situ graphene enhanced copper wire: A novel electrical material with simultaneously high electrical conductivity and high strength

Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity

A high strength and high electrical conductivity copper based composite enhanced by graphene and Al2O3 nanoparticles

Graphene-Reinforced Copper Matrix Composites as Electrical Contacts

High strength and conductivity copper matrix composites reinforced by in-situ graphene through severe plastic deformation processes

High strength and high electrical conductivity in copper reinforced with intra-/inter-granular graphene in-situ exfoliated from graphite

A novel approach for in-situ preparation of copper/graphene composite with high hardness and high electrical conductivity

Preparation and Characterization of Electroplated Cu/Graphene Composite

Advances in synthesizing copper/graphene composite material