Abstract:Graphene has attracted much interest in many scientific fields because of its high specific surface area, Young's modulus, fracture strength, carrier mobility and thermal conductivity. In particular, the graphene oxide (GO) prepared by chemical exfoliation of graphite has achieved low-cost and large-scale production and is one of the most promising for Cu matrix composites. Here, we prepared a high strength, high electrical conductivity and high thermal conductivity reduced graphene oxide (RGO)/Cu composite by directly heating the GO/copper formate. The oxygen-containing functional groups and defects of RGO are significantly reduced compared with those of GO. The tensile yield strength and thermal conductivity of RGO/Cu composite with RGO volume fraction of 0.49 vol.% are as high as 553 MPa and 364 W/(m·K) at room temperature, respectively. The theoretical value of the tensile yield strength of the composite is calculated according to the strengthening mechanism, and the result shows that it agrees with the experimental value. After hot-rolling treatment, the ductility and conductivity of the composite materials have been greatly improved, and the ductility of the RGO/Cu composite with RGO volume fraction of 0.49 vol.% has been increased to four times the original. This work provides a highly efficient way to fabricate a high-performance RGO-reinforced Cu composite for commercial application.

A novel approach to fabricate layered RGO/Cu composites with excellent mechanical properties

Facile Preparation of High-Performance Reduced Graphene Oxide (RGO)/Copper (Cu) Composites Based on Pyrolysis of Copper Formate

Facile fabrication of layer-structured graphene/copper composite with enhanced electrical and mechanical properties

Preparation and Properties of Cu-Plated Graphene/Cu Composites

Achieving high ductility in layered carbon nanotube/copper composite prepared by composite electrodeposition

Improved mechanical-physical performances of copper composites with reduced graphene oxide and carbonized polymer dots as multi-scale synergetic reinforcements

Bulk graphene-based composites with artificial nacre-like laminated structure: Microstructure and mechanical properties

High strength and electrical conductivity of copper matrix composites reinforced by carbon nanotube-graphene oxide hybrids with hierarchical structure and nanoscale twins

High strength and high electrical conductivity in copper reinforced with intra-/inter-granular graphene in-situ exfoliated from graphite

Achieving high strength and ductility in copper matrix composites with graphene network

Microstructure and Properties of a Graphene Reinforced Cu–Cr–Mg Composite

High strength and conductivity copper matrix composites reinforced by in-situ graphene through severe plastic deformation processes

A novel approach for in-situ preparation of copper/graphene composite with high hardness and high electrical conductivity

Preparation of graphene/copper composites using solution-combusted porous sheet-like cuprous oxide

laminated Cu-GO-Cu composite foils with improved mechanical and thermal properties by alternating DC electro-deposition and electrophoresis

Lateral size effect of reduced graphene oxide on properties of copper matrix composites

Achieving a better mechanical enhancing effect of carbonized polymer dots than carbon nanotubes and graphene in copper matrix

A high strength and high electrical conductivity copper based composite enhanced by graphene and Al2O3 nanoparticles

Excellent Tribological Properties of Lower Reduced Graphene Oxide Content Copper Composite by Using a One-Step Reduction Molecular-Level Mixing Process

A high strength and high electrical conductivity graphene/Cu composite with good high-temperature stability

Highly efficient enhancement of mechanical and tribological properties of Cu-based composites by addition of graphene-loaded Ni metal particles