Abstract:The development of self‐powered high‐performance UV photodetectors is essential for energy efficient futuristic wearable and portable applications. Herein, a self‐powered organic/inorganic (PTAA/GaN microwire) hybrid heterojunction ultraviolet (UV) photodetector (PD) has been prepared by a low‐cost and simple spin‐coating method. Furthermore, the piezo‐phototronic effect as an effective interfacial regulating strategy is utilized to modulate the photo‐response performances of the PD by engineering the energy‐band structure at the local junction/interface. Under 325 nm laser irradiation, the obtained device demonstrates excellent photo‐response properties at 0 V bias, showing a high responsivity (268 mA W−1) and detectivity (2.49 × 1012 Jones) under weak light intensity as low as 0.2 mW cm−2, as well as fast response speeds (rise time of 14 ms and decay time of 23 ms). The PD exhibits better performance than most reported organic/inorganic heterojunction self‐powered PDs. By applying a −0.52% compressive strain, the responsivity and detectivity of the device are greatly enhanced by 32% without external bias, and by 1256% at 2 V bias under 1.4 mW cm−2 light intensity. On the contrary, by applying a 0.41% tensile strain, the responsivity and detectivity are decreased by 18% without external bias. It indicates that the strain has a significant modulating effect on the photo‐response performance of the PD. The positive piezo‐potential modulated energy‐band structure at the PTAA/GaN interface may account for the enhanced performance. This study demonstrates a promising approach to optimize the performance of a self‐powered heterostructure optoelectronic devices through strain modulated. The PTAA/GaN microwire organic/inorganic hybrid heterojunction self‐powered ultraviolet photodetector shows a high responsivity (268 mA W−1) and detectivity (2.49 × 1012 Jones), as well as fast response speeds. By applying a −0.52% compressive strain, the responsivity and detectivity are greatly enhanced by 32%. On the contrary, by applying a 0.41% tensile strain, the responsivity and detectivity are decreased by 18%.

Improvement of Self-Driven Nanowire-Based Ultraviolet Photodetectors by Metal-Organic Frameworks for Controlling Humanoid Robots

Enhanced Performance of a Graphene/gaas Self-Driven Near-Infrared Photodetector with Upconversion Nanoparticles.

Enhance the responsivity and response speed of self-powered ultraviolet photodetector by GaN/CsPbBr3 core-shell nanowire heterojunction and hydrogel

Enhance the responsivity of self-driven ultraviolet photodetector by (Al,Ga)N nanowire/graphene/PVDF heterojunction with high stability

High-Performance Self-Powered Ultraviolet Photodetector Based On Nano-Porous Gan And Copc P-N Vertical Heterojunction

Strain-Engineering-Driven Photomechanical–Photoelectric Coupled Flexible Photodetector Based on Hexagonal Silicon Nanowire Films

High-mobility induced high-performance self-powered ultraviolet photodetector based on single ZnO microwire/PEDOT:PSS heterojunction via slight ga-doping

Enhanced Photoresponse Performance of Self‐Powered PTAA/GaN Microwire Heterojunction Ultraviolet Photodetector Based on Piezo‐Phototronic Effect

Advances in Self-Powered Ultraviolet Photodetectors Based on P-N Heterojunction Low-Dimensional Nanostructures

High-Performance Self-Driven Single GaN-Based p–i–n Homojunction One-Dimensional Microwire Ultraviolet Photodetectors

p-GaN/n-ZnO nanorods: the use of graphene nanosheets composites to increase charge separation in self-powered visible-blind UV photodetectors

Fast and High-Performance Self-Powered Photodetector Based on the ZnO/Metal-Organic Framework Heterojunction

Ordered GaN Nanorod Arrays for Self-Powered Photoelectrochemical Ultraviolet Photodetectors

Engineering GaN/AuNC core–shell nanowire heterojunctions by gold nanoclusters with excitation-dependent behavior for enhancing the responsivity and stability of self-driven photodetectors

The improvement of polymer photodetector based on 1D-ZnO nanorod arrays/0D-ZnO quantum dots composite film

GaN Nanowire/Nb-Doped MoS<sub>2</sub> Nanoflake Heterostructures for Fast UV–Visible Photodetectors

Enhanced Performance of Gan Nanobelt-Based Photodetectors by Means of Piezotronic Effects

Ultrafast Speed, Dark Current Suppression, and Self-Powered Enhancement in TiO2-Based Ultraviolet Photodetectors by Organic Layers and Ag Nanowires Regulation.

A self-powered ultraviolet photodiode using an amorphous InGaZnO/p-silicon nanowire heterojunction

Self-Integrated Hybrid Ultraviolet Photodetectors Based on the Vertically Aligned InGaN Nanorod Array Assembly on Graphene

Recent progress in photodetectors based on low-dimensional nanomaterials