Abstract:The influence of glycine, as a chelating agent, and triblock copolymer mixture of PPG-PEG-PPG and PEG1000, as a suppressor agent, on the deposition mechanisms of zinc and zinc-nickel alloys were studied by cyclic voltammetry (CV) and potentiometric electrochemical impedance spectroscopy (PEIS), using electrolyte solutions of chlorinated acid. Cyclic voltammetry measurements show that the composition of the electrolytic solution affects the voltammogram profiles. Complementary PEIS investigations allowed the electrodeposition mechanisms to be highlighted depending on the composition of the electrolytic solution. The electrodeposition of zinc, in the absence of additives, occurs in a single cathodic wave from the ZnCl 3 − species, whereas in the presence of glycine, a second more cathodic reduction wave is relative to the Zn(Gly) 2 2+ species. The presence of the PPG-PEG-PPG and PEG1000 triblock copolymer induces a clear inhibition of the zinc reduction. Nevertheless, the zinc electrodeposition follows a three-dimensional instantaneous nucleation. The zinc electroplating mechanism involves a capacitive semi-circle at high frequency and two inductive loops at medium and low frequencies assigned to two adsorbed intermediates onto the substrate whatever the electrolyte composition. The presence of the polymer mixture affects the zinc reduction by increasing the charge-transfer resistance and the adsorption phenomena on the substrate. The electrodeposition of zinc-nickel alloys reveals a single reduction wave, from ZnCl 3 − and Ni(Gly) 2+ species, and multiple anodic signals depending on the electrolytic composition, according to the presence of glycine to chelate the nickel species. The zinc-nickel electroplating was evidenced to be a multiple-step process with a three-dimensional instantaneous nucleation, including intermediate species adsorbed onto the substrate. The equivalent circuit proposed consists of two capacitive half-circles separated by an inductive loop for any electrolytic solution. However, the impedance spectra were affected by the presence of glycine by modifying the inductive loop reflecting the first adsorbed intermediate (Ni(I) ads ). The morphology of zinc and zinc-nickel, with a nickel content between 14 and 19 wt.%, is affected by the electrolyte composition, however with the same crystal lattice. The preferential orientation of the lattice was shown to depend on the additives present in the solution.

The effect of surface preparation on the nucleation of zinc-nickel alloy electroplated in acidic electrolyte on steel substrate

Effect of Zinc Immersion Pretreatment on the Electro-Deposition of Ni Onto AZ91D Magnesium Alloy

The effects of additive agents on zinc and zinc-nickel alloys electrodeposited on steel substrates in acidic electrolytes

Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes

ZINC-NICKEL ALLOY ELECTROPLATING IN AN ALKALINE BATH

Characterization of a zinc-nickel alloy coating obtained from an electrolytic bath produced with spent batteries as raw materials

Influence of Nano-Al2O3 Particles on Nickel Electrocrystallization at Initial Stage

INITIAL DEPOSITION MECHANISM OF ELECTROLESS NICKEL PLATING ON AZ91D MAGNESIUM ALLOYS

Influence of Electrodeposition Conditions on the Microstructure and Corrosion Resistance of Zn–Ni Alloy Coatings from a Deep Eutectic Solvent

Influence of Ni-electrodeposited Pretreatment on Galvanized Coatings of Reactive Steels

Surface Modification With Zinc and Zn-Ni Alloy Compositionally Modulated Multilayer Coatings

Zinc Deposition Characteristics on Different Substrates for Aqueous Zinc Ion Battery

Effect of Electrodeposited Ni Layer on the Galvanized Coatings of Reactive Steels

Effects of deposition current density, time and scanning velocity on scanning jet electrodeposition of Ni-Co alloy coating

Electrodeposition of zinc-nickel alloys from ethylene glycol-based electrolytes in presence of additives for corrosion protection

Mechanism of Zinc-Nickel Electrodeposition by the Action of Organic Additives

On the Electrodeposition of Nickel–zinc Alloys from a Eutectic-Based Ionic Liquid

Electroplating Behavior of Zn-Ni Alloys in an Alkaline Electrolyte

Study of Electroless Ni-Zn-P Alloy Plating from Acidic Bath

Optimization of Black Nickel Coatings’ Electrodeposit onto Steel

Influence of a Zwitterionic Surfactant on the Surface Properties of Electroless Ni–P Coating on Mild Steel