Characterization of a zinc-nickel alloy coating obtained from an electrolytic bath produced with spent batteries as raw materials

J Pinto,D Quiroz,P Delvasto,S Blanco

DOI: https://doi.org/10.1088/1742-6596/1119/1/012005

2018-11-01

Journal of Physics: Conference Series

Abstract:Alkaline and Ni-MH spent batteries contain heavy metals such as zinc and nickel that may affect the environment. Such materials can be used for the manufacturing of Zn-Ni anticorrosive coatings, which have better behavior against corrosion than the traditional galvanized steel. In this work, spent alkaline and Ni-MH batteries were disassembled, to extract the metals of interest. The electrode powders extracted from these batteries were leached, by separate, in ammonia plus citric acid solutions. Once the pregnant solutions were chemically analyzed to determine the concentration of zinc and nickel, an alkaline electrolytic bath was prepared with a mass proportion of 2:1 Zn-Ni. A potentiostatic deposition over low carbon steel was made using this bath. Then, the morphology and composition of the obtained coating was analyzed by scanning electron microscopy (SEM-EDS) and finally the electrochemical stability of the coating in 3.5 wt % of NaCl solution was evaluated by the following techniques: open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV). SEM results show a homogeneous, compact and adherent coating on steel and the electrochemical tests indicated that the properties of the galvanized coating were improved by the addition of 8.92 wt % of nickel.