Abstract:Dramatic development in perovskite solar cells (PSCs) and the widespread application of wearable electronics have attracted extensive research in the area of large-scale flexible solar power sources based on PSCs. Manufacturing of flexible PSCs by printing is considered to be one of the most potential methods. However, it is still a great challenge to print large-area uniform hole transport layers (HTLs) on a rough and soft plastic substrate to achieve flexible PSCs with high efficiency and good stability. Herein, we synthesized a viscous poly(3,4-ethylene dioxythiophene):graphene oxide (PEDOT:GO) gel and then blade-coated the gel by high-speed shearing to achieve high-quality HTLs with scalable size. The glued HTLs exhibit high viscosity, electrical conductivity, and mechanical flexibility, which enhance the adhesive ability and protect the brittle ITO electrode and perovskite crystals. Due to the gelatinous HTLs, we achieved an optimal efficiency of the flexible PSCs (1.01 cm2) of 19.7%, while that of the large-area flexible perovskite module (25 cm2) exceeded 10%. This is the highest efficiency for reported flexible MAPbI3 PSCs (1.01 cm2). Furthermore, the efficiency retention of the PSCs remains over 85% after 5000 bending cycles, which is of great significance for the practical application of PSCs in portable and wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00813?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00813</a>.The optical picture and rheological properties of PEDOT:PSS and GO composites ink with three different combined conditions of ultrasonication, stirring, and ultrasonication disruption; rheological properties of the solution after adding different proportions of GO (1–20 mg mL–1); temperature-dependent viscoelasticity and the viscous properties of the PEDOT:GO gel; transmittance spectra, X-ray photoelectron spectroscopy (XPS) spectra S 2p, ultraviolet photoelectron spectroscopy (UPS), and the sheet resistance of GO, PEDOT:PSS, and PEDOT:GO three HTLs; optical and AFM microscopic morphology of the large-area PEDOT:GO gel interface layer (4 × 4 cm2) blade coating on the PET film; surface SEM images, grain size distribution, 2D X-ray diffraction (2D-XRD), and steady-state PL spectra of perovskite films on GO, PEDOT:PSS, and PEDOT:GO interface layers; SEM images of GO, PEDOT:PSS, and PEDOT:GO three HTLs, the MAPbI3 films and the corresponding sheet resistance change bent with 3000 cycles within a curvature radius form flat to 5 mm; finite-elements simulation model, the stress distribution of each layer, and the Young's modulus of the flexible PSCs with PEDOT:PSS and PEDOT:GO interface layer; J–V curves of the PSCs based on GO HTLs; long-term stability of flexible PSCs based on three HTLs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00813/suppl_file/am1c00813_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Rising from the Ashes: Gaseous Therapy for Robust and Large-Area Perovskite Solar Cells

Improved Crystallinity and Self-Healing Effects in Perovskite Solar Cells Via Functional Incorporation of Polyvinylpyrrolidone

Green Solution-Bathing Process for Efficient Large-Area Planar Perovskite Solar Cells

Control of Methylamine Gas Treatment for Upscaling Perovskite Solar Module

Superior Textured Film and Process Tolerance Enabled by Intermediate-State Engineering for High-Efficiency Perovskite Solar Cells

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

A Feasible and Effective Post-Treatment Method for High-Quality CH3NH3PbI3 Films and High-Efficiency Perovskite Solar Cells

Surface Modification of PEDOT:PSS for Enhanced Performance of Inverted Perovskite Solar Cells

Scalable growth of stable wide‐bandgap perovskite towards large‐scale tandem photovoltaics

Bulk Restructure of Perovskite Films via Surface Passivation for High‐Performance Solar Cells

Homogenizing Morphology and Composition of Methylammonium‐Free Wide‐Bandgap Perovskite for Efficient and Stable Tandem Solar Cells

Combined Vacuum Evaporation and Solution Process for High‐Efficiency Large‐Area Perovskite Solar Cells with Exceptional Reproducibility

Mechanically Robust and Flexible Perovskite Solar Cells via a Printable and Gelatinous Interface

Single‐step post‐production treatment of lead acetate precursor‐based perovskite using alkylamine salts for reduced grain‐boundary related film defects

Accelerating Thermal Transfer in Perovskite Films for High‐Efficiency and Stable Photovoltaics

In Situ Polymerization of Cross‐Linked Perovskite–Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Large-Area Perovskite Solar Modules Based on Uniformity Engineering of Perovskite Films: The Critical Role of Methyldiphenylphosphine Oxide Additive

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

An Effective Strategy of Combining Surface Passivation and Secondary Grain Growth for Highly Efficient and Stable Perovskite Solar Cells

Holistic Strategies Lead to Enhanced Efficiency and Stability of Hybrid Chemical Vapor Deposition Based Perovskite Solar Cells and Modules