Abstract:Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00794?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00794</a>.Experimental Section (including materials, device fabrication, and characterization), J–V curves, XRD patterns, UV–vis absorption spectra, Tauc plot, SEM images, FTIR spectra, PL spectra, Nyquist plots, equivalent circuit, Mott–Schottky plot, statistical diagrams of photovoltaic parameters, chemical structures of the single-active-active passivation molecules, stability data, photovoltaic performance of the devices based on different MA-free perovskite compositions, TRPL fitting results, summary of champion and average photovoltaic parameters of the devices modified by different concentrations of MTDAA, summary of photovoltaic performance of reported high-efficiency CsFA-based MA-free PSCs to date, and photovoltaic performance of the devices based on different modifiers (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00794/suppl_file/nz1c00794_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Homogenizing Morphology and Composition of Methylammonium‐Free Wide‐Bandgap Perovskite for Efficient and Stable Tandem Solar Cells

Bimolecular Crystallization Modulation Boosts the Efficiency and Stability of Methylammonium‐Free Tin–Lead Perovskite and All‐Perovskite Tandem Solar Cells

Homogeneous Crystallization of MA-free, Wide-Bandgap Perovskite Films Via Self-Assembled Monolayer Capping for Laminated Silicon/perovskite Tandem Solar Cells

Low‐Dimensional 2‐thiopheneethylammonium Lead Halide Capping Layer Enables Efficient Single‐Junction Methylamine‐Free Wide‐Bandgap and Tandem Perovskite Solar Cells

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA‐Free Perovskite Solar Cells

Dual‐Interface Modification for Inverted Methylammonium‐Free Perovskite Solar Cells of 25.35% Efficiency with Balanced Crystallization

Efficient and Stable Wide‐Bandgap Methylammonium‐Free Perovskite Solar Cells by Simultaneous Passivation and Cleaning with Diamine

Stable and High‐Efficiency Methylammonium‐Free Perovskite Solar Cells

Boosting Photovoltaic Properties and Intrinsic Stability for MA-Based Perovskite Solar Cells by Incorporating 1,1,1-Trimethylhydrazinium Cation.

Toward Sustainable Manufacturing of Highly Efficient and Stable Semi-transparent Perovskite Solar Cells: the Critical Role of Green Solvent Properties

Bulk Incorporation with 4‐Methylphenethylammonium Chloride for Efficient and Stable Methylammonium‐Free Perovskite and Perovskite‐Silicon Tandem Solar Cells

Stable and Efficient Methylammonium‐, Cesium‐, and Bromide‐Free Perovskite Solar Cells by In‐Situ Interlayer Formation

Homogeneous Grain Boundary Passivation in Wide‐Bandgap Perovskite Films Enables Fabrication of Monolithic Perovskite/Organic Tandem Solar Cells with over 21% Efficiency

Enhanced Efficiency and Intrinsic Stability of Wide-Bandgap Perovskite Solar Cells through Dimethylamine-Based Cation Engineering

Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Heterogeneous Nucleation and Enhanced Charge Transfer via Amorphous Metal‐Organic Frameworks for Efficient and Stable Perovskite Solar Cells

Large-Area 23%-Efficient Monolithic Perovskite/Homojunction-Silicon Tandem Solar Cell with Enhanced UV Stability Using Down-Shifting Material

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Antioxidation and Energy-Level Alignment for Improving Efficiency and Stability of Hole Transport Layer-Free and Methylammonium-Free Tin–Lead Perovskite Solar Cells

DMSO‐Free Solvent Strategy for Stable and Efficient Methylammonium‐Free Sn–Pb Alloyed Perovskite Solar Cells