Abstract:Purpose The three-axis simulator relies on the air film between the air bearing and the bearing seat to achieve weightlessness and the frictionless motion condition, which is essential for simulating the micro-disturbance torque of a satellite in outer space. However, at the beginning of the experiment, the disturbance torque caused by the misalignment between the center of gravity of the simulator and the center of rotation of the bearing is the most important factor restricting the use of the space three-axis simulator. In order to solve this problem, it is necessary to set the balance adjustment system on the simulator to compensate the disturbance torque caused by the eccentricity. The paper aims to discuss these issues. Design/methodology/approach In this paper, a study of L1 adaptive automatic balancing control method for micro satellite with motor without other actuators is proposed. L1 adaptive control algorithm adds the low-pass filter to the control law, which in a certain sense to reduce the high-frequency signal and speed up the response time of the controlled system. At the same time, by estimating the adaptive parameter uncertainty in object, the output error of the state predictor and the controlled object can be stabilized under Lyapunov condition, and the robustness of the system is also improved. The automatic balancing method of PID is also studied in this paper. Findings Through this automatic balancing mechanism, the gravity disturbance torque can be effectively reduced down to 10 −6 Nm, and the automatic balancing time can be controlled within 7 s. Originality/value This paper introduces an automatic balancing mechanism. The experimental results show that the mechanism can greatly improve the convergence speed while guaranteeing the control accuracy, and ensuring the feasibility of the large angle maneuver of spacecraft three-axis simulator.

Automatic Mass Balancing of Spacecraft Attitude Simulators by Optimal Feedback Control

Automatic Mass Balancing of a Spacecraft Three-Axis Simulator: Analysis and Experimentation

Automatic Mass Balancing of A Spacecraft Simulator Based on Non-Orthogonal Structure

Mass properties identification and automatic mass balancing system for satellite attitude dynamics simulator

Automatic Balancing for Satellite Simulators with Mixed Mechanical and Magnetic Actuation

Automatic mass balancing and design of a six degrees-of-freedom air bearing spacecraft simulator

Automatic mass balancing system for a dynamic CubeSat attitude simulator: development and experimental validation

Balancing of a Small Satellite Attitude Control Simlator on an Air Bearing

A study of PID and L1 adaptive control for automatic balancing of a spacecraft three-axis simulator

Attitude Control For Flexible Spacecraft With Swinging Components

System Design and Attitude Control Experiment of A 5-Dof Spacecraft Simulator

An Effective Method for Designing Attitude Maneuver Analog Control Law with Neutral Buoyancy for Experimental Model

On Attitude Recovery of Spacecraft using Nonlinear Control

Extended validation of a ground-based three-axis spacecraft simulator model

An effective approach to identify the mass properties of a satellite attitude dynamics simulator

Dynamic Modeling for Automatic Balancing System of 3-DOF Air-bearing Test-bed

Attitude Stabilization of Flexible Spacecraft Using Output Feedback Controller

Dynamic Near-Optimal Control Allocation for Spacecraft Attitude Control Using a Hybrid Configuration of Actuators

Research Automatic Stability Technology of Spacecraft Assembly with Captured Non-cooperative Targets on Orbit

Dynamic Control Allocation for Attitude Stabilization of Spacecraft Considering Actuator Misalignment

Six-DOF Spacecraft Dynamics Simulator For Testing Translation and Attitude Control