Abstract:The dynamics and control of spacecraft have been widely studied because of their technological significance. In the classical case the spacecraft is assumed to consist of a single rigid body with three-axis torque inputs and with attitude and rate sensing. In practice, however, the situation may be far more complex. For example, any component of the spacecraft that deforms relative to other components will entail a change in the spacecraft mass distribution; in effect, the spacecraft becomes a multibody system. Similarly, structural flexibility and fuel slosh give rise to vibrational degrees of freedom. Spacecraft control is also exacerbated by sensor and actuator nonlinearities. Traditional actuation devices such as thrusters, reaction wheels, momentum wheels, and control moment gyros entail amplitude and rate saturation constraints, gyroscopic coupling, and coupling between translational and attitude dynamics. Additional difficulties arise when accounting for gravitational effects and external disturbances. All of these issues have technological implications. A fundamental difficulty associated with spacecraft technology is the fact that ground-based testing must occur in a 1-g environment whereas the hardware will operate under zero-g conditions. Consequently, spacecraft control engineering must depend on first-principles analysis as well as extrapolation from 1-g testing. The purpose of this paper is to describe a laboratory-based testbed that will be used to explore various issues and concepts in spacecraft dynamics and control. This testbed is based on a triaxial air bearing to allow experiments involving large-angle, three-axis motion. As a precursor to this testbed, we have also developed an air spindle testbed which allows single-axis rotation.

Air bearing platforms for simulation of spacecraft attitude control systems

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Three-axis air-bearing based platform for small satellite attitude determination and control simulation

IAC-15,E2,2,4,X31653 3-DOF GAS BEARING SIMULATOR FOR SMALL SATELLITE TESTS WITH AUTOMATED MASS DISPLACEMENT CONTROL TO ELIMINATE DISTURBANCE TORQUES

Balancing of a Small Satellite Attitude Control Simlator on an Air Bearing

Automatic mass balancing and design of a six degrees-of-freedom air bearing spacecraft simulator

Automatic mass balancing system for a dynamic CubeSat attitude simulator: development and experimental validation

Characterizing an Air-Bearing Testbed for Simulating Spacecraft Dynamics and Control

Extended validation of a ground-based three-axis spacecraft simulator model

Development of a Low-Cost Satellite Three-Axis Attitude Simulator Testbed

Research on three axis air bearing platform simulation system for small satellite attitude control

Design of a Low-Cost Air Bearing Testbed for Nano CMG Maneuvers

3-DOF Position and Orientation Control of an Air Flotation Platform for Spacecraft Ground Microgravity Simulation by Using Double Closed-Loop Cascade PIDnn

Attitude Control For Flexible Spacecraft With Swinging Components

Automatic Balancing for Satellite Simulators with Mixed Mechanical and Magnetic Actuation

Development of air spindle and triaxial air bearing testbeds for spacecraft dynamics and control experiments

A six-degree-of-freedom hardware-in-the-loop simulator for small spacecraft

A Dynamic, Hardware-in-the-Loop, Three-Axis Simulator of Spacecraft Attitude Maneuvering with Nanosatellite Dimensions

START: A Satellite Three Axis Rotation Testbed