Abstract:Cavities with asymmetrical walls exist in many industrial applications and its acoustic properties are crucial to noise and vibration control. However, traditional methods are complex and time-consuming such as finite element method (FEM). Given the problems existing in traditional methods, the ISM-TM algorithm which combined the image source model (ISM) with the transformation matrix (TM) is proposed to explore acoustic resonances of a 3D open cavity with asymmetrical walls in this work. Compared with experiments, the proposed algorithm can well obtain the acoustic resonances of a 3D open rectangle cavity and a 3D open cavity with non-parallel walls. In a 3D open rectangle cavity, with the increase of the calculation frequency, the relative error between acoustic resonant frequencies measured by experiments and estimated by the ISM-TM is reduced from <math>11.3%</math> to <math>0.9%</math>. In a 3D open cavity with non-parallel walls, with the increase of the calculation frequency, the relative error between acoustic resonant frequencies measured by experiments and estimated by the ISM-TM is reduced from <math>2.3%</math> to <math>0.2%</math>. The results suggest that the proposed algorithm in this work could well estimate acoustic resonances of a 3D open cavity for medium and high frequency. Compared with the FEM, the proposed algorithm can provide the frequency response function (FRF) of any point in a 3D open cavity easily and quickly. The ISM-TM can be used to guide cavity design to predict possible acoustic resonances in the cavity in advance.

A Simple and Effective Method for the Resonance Frequencies Identification of the Complex Cavities Within Reverberation Chamber

Evaluation of the Method Based on Psr Techniques for Target Detection in Reverberation

Research of Coupling Coefficient Extraction of a Cavity Resonator

Study of the Partially Open Cavity's Resonant Character

Study of the Crosstalk Evaluation for Cavity BPM

A fast and efficient algorithm for acoustic resonances of a 3D open cavity with asymmetrical walls

Hybrid Electromagnetic Boundary for Cavity Resonance Suppression

Non-contact measurement of complex permittivity based on coupled magnetic and electric resonances

Measurement based on twice cavity perturbations for permittivity of dielectric thin films

Note: an in Situ Method for Measuring the Non-Linear Response of a Fabry-Perot Cavity.

Highly Sensitive Complicated Spectrum Analysis in Micro-Bubble Resonators Using the Orthogonal Demodulation Pound–Drever–Hall Technique

A Fourier-matching Method for Analyzing Resonance Frequencies by a Sound-hard Slab with Arbitrarily Shaped Subwavelength Holes

Reverberation Chamber Stirring Method Based on Phased Array Antenna and Frequency Stirring Techniques

Novel Method to Measure Unloaded Quality Factor of Resonant Cavities at Room Temperature

Ultraprecise Resonant Frequency Prediction of Microwave Cavities With Deformations

On acoustic absorption mechanisms of multiple coupled quarter-wavelength resonators: Mutual impedance effects

Detecting resonance of radio-frequency cavities using fast direct integral equation solvers and augmented Bayesian optimization

Numerical Analysis of Resonances by a Slab of Subwavelength Slits by Fourier-Matching Method

High-Accuracy Wide-Range Measurement Method for Determination of Complex Permittivity in Reentrant Cavity: Part A --- Theoretical Analysis of the Method

A Fourier Matching Method for Analyzing Resonances in a Sound-Hard Slab with Subwavelength Holes

Noise Control in Enclosures: Modeling and Experiments with T-shaped Acoustic Resonators