Abstract:Underground rock is often subjected to the coupled action of acid sulfate, chloride ion corrosion, and external dynamic disturbance: the degree of corrosion and dynamic load can significantly affect the pore structure and mechanical behavior of rock. To quantify the microscopic pore structure changes and macro-dynamic behavior characteristics of acidified corroded sandstone, first, a mixed acidic solution of NaHSO4 and HCl with different pH values was used for immersion corrosion of sandstone; second, the pore structure of sandstone before and after corrosion was quantitatively evaluated by nuclear magnetic resonance (NMR), dynamic loading tests of corroded sandstone were conducted on an SHPB experimental system and scanning electron microscopy (SEM) was used to observe the morphology of corroded sandstone section; and finally, the mechanism of water–rock interaction and damage and fracture of acid-corroded sandstone were analyzed. The results show that, after acidizing corrosion of sandstone, the macropores increase significantly in number and volume, the boundary of the pore structure tends to be fuzzy; the effective porosity, the number of effective pores, and the total porosity increase significantly; the residual porosity, the number of residual pores, and T2 cut-off value decrease. The proportion accounted for by the elastic stage in stress–strain curves of corroded sandstone is lowered; the proportion accounted for by the plastic yield stage is increased; and post-peak rebound is diminished. With the decrease of pH value, the peak stress on acid-corroded sandstone decreases and the peak strain increases. The peak stress on corroded sandstone is negatively correlated with effective porosity and the number of effective pores, but positively correlated with residual porosity, the number of residual pores, and the T2 cut-off value. The reaction of acidic solution with sandstone minerals causes the free fluid space to increase, the bound fluid space decreases, and the number of pores increases, resulting in a decrease in the dynamic strength of acidified sandstone. The fracture of original sandstone after impact failure has no obvious directionality, and the failure mode of grain is the coexistence of intergranular fracture and trans-granular fracture. The fracture of sandstone after acidizing corrosion is obviously directional after impact damage, and the fracture form is single, which is intergranular fracture. The research results can provide a certain reference for the protection of rock engineering under acidic water chemical environment.

The Influence of Petrographic Properties on Mechanical Characteristics and the Durability of the Greenschist Subjected to Simulated Weathering Tests

Role of petrography in durability of limestone used in construction of Persepolis complex subjected to artificial accelerated ageing tests

Assessment of the Effects of Freeze–Thaw and Salt Crystallization Ageing Tests on Anahita Temple Stone, Kangavar, West of Iran

Mechanical Properties of Weathered Feldspar Sandstone after Experiencing Dry-Wet Cycles

Study on the deterioration characteristics of greenschist under hydrochemical action and the disaster-causing mechanism in slope

Micro-damage evolution and macro-degradation of red sandstone under thermal and chemical erosion conditions

Study on the Effect of Dry–Wet Cycles on Dynamic Mechanical Properties of Sandstone Under Sulfuric Acid Solution

Assessing the effect of freezing-thawing cycles on the results of the triaxial compressive strength test for calc-schist rock

Investigations of Variations in Physical and Mechanical Properties of Granite, Sandstone, and Marble after Temperature and Acid Solution Treatments

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

Microscopic weathering characteristics and deterioration mechanisms of sandstone in the Nankan Grotto, northern Sichuan, China

An assessment of the durability of untreated and water repellent-treated cultural heritage stone (Döğer tuff-Turkey) by salt mist and salt crystallization tests

Combined effects of freeze–thaw cycles and chemical corrosion on triaxial mechanical properties of sandstone

Mechanical Properties and Energy Evolution of Red Sandstone Under the Influence of Acid Corrosion

Chemical thermodynamics and chemical kinetics analysis of sandstone dissolution under the action of dry–wet cycles in acid and alkaline environments

Deterioration Effect of Sandstone Tensile Strength and Its Mesoscopic Mechanism under Dry-wet Cycles

The Effect of Salt Crystallization on Degradation of Limestones Used as Heritage Building Stone in Lorestan, Iran

Experimental study on the effects of hydrochemistry and periodic changes in temperature and humidity on sandstone weathering in the Longshan Grottoes

Study on the mechanical properties and microscopic evolution mechanisms of weathered granite soil

Effect of impact loading and acidic drying-wetting cycles on fragmentation and energy dissipation characteristics of sandstone

Influence of Chemical Corrosion on Pore Structure and Mechanical Properties of Sandstone