Abstract:A polydentate ligand‐regulated dual‐surface stress management strategy for perovskite (PVK) is designed, which eliminates tensile strain and interface defects via multidentate anchoring. The optimized PSC achieved an excellent PCE of 24.70% and a high open circuit voltage of 1.24 V. The modified device (unencapsulated) maintains 92% of initial PCE after 2000 h in the atmosphere and 91% after 500 h under 85% RH, showcasing enhanced stability. Continuous breakthroughs of photoelectric conversion efficiency (PCE) in perovskite solar cells are achieved, but the inherent instability caused by residual tensile strain and interfacial defects remains a major obstacle to their application. In this study, a polydentate ligand‐regulated dual‐surface stress management strategy for perovskite (PVK) is introduced to eliminate tensile strain and interface defects via multidentate anchoring. 3‐amino‐5‐bromopicolinaldehyde (BD) is employed on the lower surface of PVK, while its −CO, −NH2, and pyridine functional groups facilitate the bridging of SnO2 with PVK, alleviating tensile stress and lowering interfacial energy barriers. For the upper surface, the bis−SO2, pyridine, and bis−CF3 functional groups of N‐(5‐Chloro‐2‐pyridyl) bis(trifluoromethanesulfonimide) (FC) are utilized to increase the ion migration energy barrier through anchoring, which effectively diminishes tensile stress and defects. Besides, −CF3 also constructs a hydrophobic barrier on the upper surface. Notably, tensile stress successfully transforms into compressive stress based on the dual‐surface stress regulation, significantly improving the framework stability of PVK. Consequently, the devices treated with BD and FC achieve an elevated open‐circuit voltage of 1.24 V and PCE of 24.70%. The modified device (unencapsulated) maintains 92% of initial PCE after 2000 h in the atmosphere and 91% after 500 h under 85% RH, showcasing enhanced stability.

Local nearly non-strained perovskite lattice approaching a broad environmental stability window of efficient solar cells

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

Inhibited Crack Development by Compressive Strain in Perovskite Solar Cells with Improved Mechanical Stability

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Stability-enhanced perovskite heterointerfaces and solar cells via strongly anchored and sterically hindered ligands

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation

Dual‐Surface Polydentate Anchoring Enabled Strain Regulation for Stable and Efficient Perovskite Solar Cells

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Surface Lattice Engineering Enables Efficient Inverted Perovskite Solar Cells

Metastable interphase induced pre-strain compensation enables efficient and stable perovskite solar cells

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Aqueous solvent-regulated crystallization and interfacial modification in perovskite solar cells with enhanced stability and performance

Oligomeric Silica-Wrapped Perovskites Enable Synchronous Defect Passivation and Grain Stabilization for Efficient and Stable Perovskite Photovoltaics

Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells

Buried Interface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Mechanical Stability

Strain relaxation and phase regulation in quasi-2D perovskites for efficient solar cells

Impeded Degradation of Perovskite Solar Cells Via the Dual Interfacial Modification of Siloxane

An illustrative understanding on strengthening in stability and efficiency of perovskite solar cells: Utilization of the perovskite-constructed polymer hybrid system of PHQACl-CN inclusion

Enhancing the Stability of Perovskite Solar Cells through an Iodine Confining Strategy

Supramolecular Polyurethane "Ligaments" Enabling Room‐Temperature Self‐Healing Flexible Perovskite Solar Cells and Mini‐Modules