Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

Non‐destructive texture characterization by a robot‐arm‐driven X‐ray diffractometer

X-Ray Computer Tomography on Residual Stress Measurement

Nondestructive Texture Measurement of As-Received Ti Alloy Tubing Via Simultaneous Shaping and Tilting Defocusing Correction

Combined Texture and Microstructure Analysis of Deformed Crystals by High-Energy X-ray Diffraction

In-house texture measurement using a compact neutron source

Texture tomography with high angular resolution utilizing sparsity

Characterization of Fiber Texture by Omega-Scan X-Ray Diffraction

A Preliminary Investigation for Application of an Advanced X-Ray Diffraction Analyzer to In-Process Texture Assessment of Aluminum Alloy Sheet

Establishment and Optimization of Angle Dispersive Neutron Diffraction Bulk Texture Measurement Environments

Surface texture measurement for additive manufacturing

Accurate Distances Measures and Machine Learning of the Texture-Property Relation for Crystallographic Textures Represented by One-Point Statistics

High-Resolution Scanning X-ray Diffraction Microscopy

A machine learning approach to map crystal orientation by optical microscopy

A methodology for the 3D characterization of surfaces using X-ray computed tomography: Application to additively manufactured parts

Postprocessing Workflow for Laboratory Diffraction Contrast Tomography: A Case Study on Chromite Geomaterials

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Non-destructive characterisation of out-of-plane fibre waviness in carbon fibre reinforced polymers by X-ray dark-field radiography

Texture tomography, a versatile framework to study crystalline texture in 3D

Automated indexing for texture and strain measurement with broad-bandpass x-ray microbeams

Simulations of x-ray diffraction from uniaxially-compressed highly-textured polycrystalline targets

Optical and XCT Measurement of Additively Manufactured Surfaces