Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

3D printed carbon-fibre reinforced composite lattice structures with good thermal-dimensional stability

Lightweight 3D carbon fibre reinforced composite lattice structures of high thermal-dimensional stability

Mechanical properties of modular assembled composite lattice architecture

Mechanical and Self-Monitoring Behaviors of 3D Printing Smart Continuous Carbon Fiber-Thermoplastic Lattice Truss Sandwich Structure

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Design and Manufacturing of a Composite Lattice Structure Reinforced by Continuous Carbon Fibers

Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine

3D printing of architectured epoxy-based composite lattices with exceptional strength and toughness

Superior compressive properties of 3D printed plate lattice mechanical metamaterials

Design Data and Finite Element Analysis of 3D Printed Poly(ε-Caprolactone)-Based Lattice Scaffolds: Influence of Type of Unit Cell, Porosity, and Nozzle Diameter on the Mechanical Behavior

Interlacing Technique for New Carbon Fiber Lattice Materials

Thermo-mechanical performance of 3D-printed TC4 hierarchical lattice-truss-core sandwich structures in high temperature conditions

Compression Performance and Deformation Behavior of 3D-Printed PLA-Based Lattice Structures

Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Thermally Conductive 3D-Printed Carbon-Nanotube-Filled Polymer Nanocomposites for Scalable Thermal Management

Mechanical and Biological Characterization of 3D Printed Lattices

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

DEVELOPMENT OF LATTICE MATERIALS WITH HIGH SPECIFIC STIFFNESS AND STRENGTH