Abstract:Cellular lattices with architectural intricacy or metamaterials have gained a substantial amount of attention in the past decade due to the recent advances in additive manufacturing methods. The lattice topology controls its physical and mechanical properties; therefore, the main challenge is selecting the appropriate lattice topology for a desired function and application. In this work, we comprehensively study the topology–property relationship of three classes of polymer metamaterials based on triply periodic minimal surfaces (TPMS) of sheet/shell and ligament types, and other types of well-known strut-based lattices. The study uses a holistic approach of designing, additive manufacturing, microstructural characterization, and compressive uniaxial mechanical testing of these polymer lattices that are 3D-printed using the laser powder bed fusion technique known as selective laser sintering (SLS). In total, 55 lattices with different topologies and relative densities were 3D-printed and tested. Printing quality was assessed using scanning electron microscopy and micro-computed tomography. The extracted mechanical properties of elastic modulus, yield strength, plateau strength, and energy absorption are thoroughly compared between the different lattice architectures. The results show that all the investigated ligament-based TPMS polymer lattices exhibit bending-dominated elastic and plastic behavior, indicating that they are suitable candidates for energy absorbing applications. The sheet-based TPMS polymer lattices, similarly to the well-known Octet-Truss lattice, exhibited an elastic stretching-dominated mode of deformation and proved to have exceptional stiffness as compared to all other topologies, especially at low relative densities. However, the sheet-based TPMS polymer lattices exhibited a bending-dominated plastic behavior which is mainly driven by manufacturing defects. Overall, however, sheet-based TPMS polymer lattices exhibited the best mechanical properties, followed by strut-based lattices and finally by ligament-based TPMS lattices. Finally, it is depicted that at high relative densities, the mechanical properties of lattices of various architectures tend to converge, which implies that the topological effect is more significant at low relative densities. Generally, this study provides important insights about the selection of polymer mechanical metamaterials for various applications, and shows the superiority of TPMS-based polymer metamaterials as compared to several other classes of polymer mechanical metamaterials.

Superior compressive properties of 3D printed plate lattice mechanical metamaterials

Additively-manufactured anisotropic and isotropic 3D plate-lattice materials for enhanced mechanical performance: Simulations & experiments

Compressive and Energy Absorption Properties of Pyramidal Lattice Structures by Various Preparation Methods

Additively Manufactured Plate Lattice Interpenetrating Composites with High Yield Strength and Energy Absorbing Capability

Mechanical Properties and Energy Absorption Capabilities of Plate-Based AlSi10Mg Metamaterials Produced by Laser Powder Bed Fusion

Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: Experimental investigation and modelling

Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures

Mechanical Design and Energy Absorption of 3D Novel Hybrid Lattice Metamaterials

Intertwined Microlattices Greatly Enhance the Performance of Mechanical Metamaterials

Analysis of the Deformation Mechanism and Mechanical Properties of Graded Body-Centered Cubic Nested Body-Centered Cubic Lattice Material

On the Effect of Lattice Topology on Mechanical Properties of SLS Additively Manufactured Sheet-, Ligament-, and Strut-Based Polymeric Metamaterials

Mechanical behavior analyses of 4D printed metamaterials structures with excellent energy absorption ability

Tunable mechanical performance of additively manufactured plate lattice metamaterials with half-open-cell topology

A Hybrid Architectural Metamaterial Combing Plate Lattice and Hollow-Truss Lattice with Advanced Mechanical Performances

Design and Application of Hybrid Lattice Metamaterial Structures with High Energy Absorption and Compressive Resistance

Compressive Behavior and Energy Absorption of Polymeric Lattice Structures Made by Additive Manufacturing

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

Crystal Sheet Lattices: Novel Mechanical Metamaterials with Smooth Profiles, Reduced Anisotropy, and Enhanced Mechanical Performances

Effect of plate lattice-filling on the compressive mechanical property of 3D-printed square honeycombs

Parametric Plate Lattices: Modeling and Optimization of Plate Lattices with Superior Mechanical Properties

Additive Manufacturing of Metallic Metamaterials with Enhanced Mechanical Properties by Microstructural and Structural Design