Abstract:The relatively poor atomic-oxygen (AO) resistance of the standard polyimide (PI) films greatly limits the wide applications in low earth orbit (LEO) environments. The introduction of polyhedral oligomeric silsesquioxane (POSS) units into the molecular structures of the PI films has been proven to be an effective procedure for enhancing the AO resistance of the PI films. In the current work, a series of POSS-substituted poly (pyromellitic anhydride-4,4′-oxydianiline) (PMDA-ODA) films (POSS-PI) with different POSS contents were synthesized via a POSS-containing diamine, N-[(heptaisobutyl-POSS)propyl]-3,5-diaminobenzamide (DABA-POSS). Subsequently, the effects of the molecular structures on the thermal, tensile, optical, and especially the AO-erosion behaviors of the POSS-PI films were investigated. The incorporation of the latent POSS substituents decreased the thermal stability and the high-temperature dimensional stability of the pristine PI-0 (PMDA-ODA) film. For instance, the PI-30 film with the DABA-POSS content of 30 wt% in the film exhibited a 5% weight loss temperature (T5%) of 512 °C and a coefficient of linear thermal expansion (CTE) of 54.6 × 10−6/K in the temperature range of 50–250 °C, respectively, which were all inferior to those of the PI-0 film (T5% = 574 °C; CTE = 28.9 × 10−6/K). In addition, the tensile properties of the POSS-containing PI films were also deteriorated, to some extent, due to the incorporation of the DABA-POSS components. The tensile strength (TS) of the POSS-PI films decreased with the order of PI-0 > PI-10 > PI-15 > PI-20 > PI-25 > PI-30, and so did the tensile modulus (TM) and the elongations at break (Eb). PI-30 showed the TS, TM, and Eb values of 75.0 MPa, 1.55 GPa, and 16.1%, respectively, which were all lower than those of the PI-0 film (TS = 131.0 MPa, TM = 1.88 GPa, Eb = 73.2%). Nevertheless, the incorporation of POSS components obviously increased the AO resistance of the PI films. All of the POSS-PI films survived from the AO exposure with the total fluence of 2.16 × 1021 atoms/cm2, while PI-0 was totally eroded under the same circumstance. The PI-30 film showed an AO erosion yield (Es) of 1.1 × 10−25 cm3/atom, which was approximately 3.67% of the PI-0 film (Es = 3.0 × 10−24 cm3/atom). Inert silica or silicate passivation layers were detected on the surface of the POSS-PI films after AO exposure, which efficiently prevented the further erosion of the under-layer materials.

Polyhedral oligomeric silsesquioxane polyimide nanocomposites for color filters and flexible conductive films

Spectral-Filtering Compact Film Structure Featuring Ultralow Electrical Resistivity

Atomic Oxygen-Resistant Polyimide Composite Films Containing Nanocaged Polyhedral Oligomeric Silsesquioxane Components in Matrix and Fillers

Preparation and Properties of Intrinsically Atomic-Oxygen Resistant Polyimide Films Containing Polyhedral Oligomeric Silsesquioxane (POSS) in the Side Chains

Preparation and Characterization of Transparent Polyimide Nanocomposite Films with Potential Applications as Spacecraft Antenna Substrates with Low Dielectric Features and Good Sustainability in Atomic-Oxygen Environments

Polyhedral Oligomeric Silsequioxane Monolayer As A Nanoporous Interlayer for Preparation of Low-K Dielectric Films

Synthesis and Electrochemical Properties of a Novel Poly(ether Sulfone) with Oligoaniline Pendants

POSS Polyimide Sealed Flexible Triple‐Junction GaAs Thin‐Film Solar Cells for Space Applications

Synthesis of UV-resistant and colorless polyimide films for optoelectrical applications

Ultralow Coefficient of Thermal Expansion and a High Colorless Transparent Polyimide Film Realized Through a Reinforced Hydrogen-Bond Network by In Situ Polymerization of Aromatic Polyamide in Colorless Polyimide

Colorless Poly(amide-imide)s with Low Dielectric Constants and Enhanced Mechanical Properties through Tri-Armed Cross-Linkers

Functional POSS based polyimide nanocomposite for enhanced structural, thermal, antifouling and antibacterial properties

Flexible and hydrophobic polyimide/MXene-POSS nanocomposite films for electromagnetic interference shielding

Janus polyimide films with outstanding AO resistance, good optical transparency and high mechanical strength

Reduced coefficient of linear thermal expansion of colorless and transparent polyimide by introducing rigid-rod amide unit: synthesis and properties

Large-Area Flexible Electrochromic Devices with High-Performance and Low-Power Consumption Enabled by Hydroxyhexyl Viologen-Substituted Polyhedral Oligomeric Silsesquioxane

A novel high-performance composite material with low dielectric constant and excellent hydrophobicity

Highly Transparent and Colorless Polyimide Film with Low Dielectric Constant by Introducing Meta-substituted Structure and Trifluoromethyl Groups

Fluorinated polyimide/POSS hybrid polymers with high solubility and low dielectric constant

Short-Side-Chain Regulation of Colorless and Transparent Polyamide-Imides for Flexible Transparent Displays

High-Transparency and Colorless Polyimide Film Prepared by Inhibiting the Formation of Chromophores