Abstract:This article proposes a support diminution design method for layered manufacturing of manifold surface based on variable orientation tracking (VOT). We aim at reducing the external support or upholders to a minimum with maximum possibility theoretically to save material and diminish material stripping effect ( MSE), thereby improving the bilateral surface precision either exterior or interior. The cosmic gravity effect criterion is first used to extract surface need support from manifold surface with various materials by considering the balance force involving material characteristics and inclination angle. In the light of this criterion theory, varying the substrate normal orientation (SNO), namely workbench, for each layer in printing coordinate system, may break the balance between gravity and its equilibrium force. Therefore, the optimal SNO can be rigorously calculated using mathematical harmonic analysis among the continuous domain. To serve for the multidegree of freedom (DOF) on account of SNO, a reconfigurable VOT robot with six-axis DOF is developed for 3D printing (3DP). The matched servo controller is successfully implemented to accurate tracking of both orientation and Cartesian coordinates, using forward kinematic chains as well as reverse kinematic tracking. What is more, the endeffector (extruder) is holding perpendicular to the substrate workbench. The physical experiment that takes human external ear auricle, for example, using a layer-based process is implemented via VOT. The MSE due to supporting material can be clearly observed and diminished using an optical microscope. The stripped material from external support via diminution design can be evaluated quantitatively by electronic weighting balance. All of which indicate the findings that external support in 3DP can be virtually reckoned and diminished using VOT rather than the so-called build orientation traversal method. The VOT method upon which we touched can be widely applied to various layered manufacturing of accurate structure, for instance, cantilever, sandwich, and scaffolds in the occasion needing precise curtailment of outer support multimaterial.

Fabrication of Functional Surfaces Using Layer Height Method in Material Extrusion Type 3D Printing

Support Diminution Design for Layered Manufacturing of Manifold Surface Based on Variable Orientation Tracking

Modeling and Process Planning for Curved Layer Fused Deposition

Direct 3D printing functional surfaces stacked with microstructured filaments

Fabrication of 3D micropatterned hydrophobic surfaces by fused filament fabrication printing technology

Fast Digital Patterning of Surface Topography Toward Three-Dimensional Shape-Changing Structures

High-resolution and programmable line-morphologies of material-extrusion 3D printed self-leveling inks

Fabrication of Polymethyl Methacrylate (PMMA) Hydrophilic Surfaces Using Combined Offset-Tool-Servo Flycutting and Hot Embossing Methods

Multimaterial Extrusion of Programmable Periodic Filament Structures Via Modularly Designed Extruder Heads

Extrusion-based 3D co-printing: printing material design and novel workflow for fabricating patterned heterogeneous tissue structures

A heterogeneous pore design algorithm for material extrusion additive manufacturing

Enhancing of Surface Quality of FDM Moulded Materials through Hybrid Techniques

3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane‐Integrated Fluidic Devices

Rotational Co-extrusion 4D Printing of Heterogeneous Filaments to Enable Sophisticated Shape Morphing

Multimaterial 3D Printing for Arbitrary Distribution with Nanoscale Resolution

Superhydrophobic μ-pillars via simple and scalable SLA 3D-printing: the stair-case effect and their wetting models

Surface wettability patterning of metal additive manufactured parts via laser-assisted functionalization

Facile Surface Functionalization Strategy for Two‐Photon Lithography Microstructures

Modeling of non-planar slicer for improved surface quality in material extrusion 3D printing

Phase I study of sunitinib (SU) in combination with pemetrexed (Pem) in patients (pts) with advanced solid tumors (ST).

3D Multiscale Micro-/Nanofolds by Femtosecond Laser Intermittent Ablation and Constrained Heating on a Shape Memory Polymer