A study on vibration reduction by heat deformation of casting frame motor

Byeong Yoon Moon,Dae-Seung Cho

DOI: https://doi.org/10.1007/s12206-022-0301-9

IF: 1.81

2022-03-30

Journal of Mechanical Science and Technology

Abstract:High vibration in the horizontal motor causes damage in the shaft and bearing and it leads to a reduction in the lifetime and performance of the motor. A proper bearing preload and frame design can reduce some of the causes of high vibration. Preload increases the stiffness of the bearing and leads to a change in the natural frequency of the rotor. The frame also affects the natural frequency of the rotor as the bearing is supported by the frame. The heat generated during the operation leads to large and imbalanced thermal deformation in the frame, and it can result in high vibration. This paper presents a proper way to consider bearing preload, stiffness, and thermal deformation of the frame. A coil spring is applied to impose preload and its effect on axial rigidity is calculated by FEA (finite element analysis). Frame stiffness and thermal deformation are also calculated by FEA, and reinforcement is made to increase the stiffness of the bearing support structure and to reduce thermal deformation. The countermeasure was verified by measurement and the result showed a 50 % vibration reduction.

engineering, mechanical