Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. This article aims to analyze the tool vibration, surface roughness, and chip morphology in hard turning of hot work AISI H13 steel under multi-walled carbon nanotubes mixed nanofluid with minimum quantity lubrication. Recently developed new-generation nanocomposite AlTiSiN coating deposited on carbide insert via scalable pulsed power plasma (S3P) strategy is used as cutting tool material. The experiments associated with 30 number of trials are performed by considering various machining parameters that includes cutting speed, nose radius, depth of cut, and feed. In perspective of predictive modeling and multi-response optimization, response surface methodology has been engaged as a means to minimize the tool vibration and surface roughness. At last, with the measured tool life and based on the Gilbert's machining economic model, a distinctive cost analysis has been implemented to demonstrate the cost-effectiveness of coated carbide tool in hard turning. Statistical analysis confirms that nose radius with 36.65% has the highest contribution for surface roughness and cutting speed with 53.88% has the highest contribution for tool vibration. Increased flank wear and tool vibration are responsible for degradation of machined surface finish. Machining under nanofluid-MQL, chip morphology revealed the production of segmented type serrated saw-toothed chips. At higher cutting speed resulted: (a) obvious shape of saw tooth chip, (b) increase of distance among saw tooth, (c) reduction in chip segmentation frequency, (d) decrease of chip thickness. At optimum combination of process variables (v = 55 m/min, d = 0.2 mm, r = 1.2 mm, f = 0.07 mm/rev), the life of AlTiSiN coated carbide tool is found to be 42 min under nanofluid-MQL and estimated the total machining cost expenditure per finished part of Rs. 153.52. New-generation AlTiSiN coated carbide tools can be competently and productively utilized for machining of hot work tool steel under ecologically cognizant minimum quantity cooling-lubrication, is the most accepted in industrial applications.

Wear reduction mechanism in modulated turning of nodular graphite iron with coated carbide tool

Enhancing Material Removal Processes Using Modulation-Assisted Machining

Dry Turning of Rotor Steel 26NiCrMoV145 Using Multilayer Coated Cemented Carbide Tools

Analysis of Tool Wear in GH4169 Material Milling Process

Wear behavior of different coated tools in MQL-assisted high-speed milling of magnesium-based rare-earth alloys

An investigation on wear mechanism of high-speed turning of free-cutting steel AISI 1215 using uncoated and multi-layer coated tools

Carbide Tool Wear Mechanisms in Laser-Assisted Machining of Metal Matrix Composites

Experimental and FEM Study of Coated and Uncoated Tools Used for Dry Milling of Compacted Graphite Cast Iron

Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy

Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication

Suppression mechanism of diamond tool wear by graphene nanofluid in micro-milling of TC4 alloy: A study combining experimental and molecular dynamics

Wear Performance of (Nc-Altin)/(a-si3n4) Coating and (Nc-Alcrn)/(a-si3n4) Coating in High-Speed Machining of Titanium Alloys under Dry and Minimum Quantity Lubrication (mql) Conditions

Mechanisms involved in the tool life improvement of laser assisted machining 45%SiCp/Al composites

Wear Suppression and Interface Properties of Diamond Tool in Micro-Milling of TC4 Alloy under Graphene Nanofluid MQL Environment

Wear Mechanism of High-Speed Turning Ti-6Al-4V with TiAlN and AlTiN Coated Tools in Dry and MQL Conditions

An experimental and fem study on dry turning of rotor steel 26NiCrMoV145 using multilayer coated cemented carbide tool

Cutting performances of MCD, SMCD, NCD and MCD/NCD coated tools in high-speed milling of hot bending graphite molds

Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication

Performance analysis of conventional and high-feed turning tools in machining the thermally affected zone after plasma arc cutting of low carbon manganese-alloyed steel

Using Nano-Fluids Minimum Quantity Lubrication (NF-MQL) to Improve Tool Wear Characteristics for Efficient Machining of CFRP/Ti6Al4V Aeronautical Structural Composite

Machinability Performance of Single Coated and Multicoated Carbide Tools During Turning Ti6Al4V Alloy