Abstract:The process of melt electrospinning has received noteworthy attention due to its ability to fabricate micro scaled polymer fibers. Recently, a melt electrospinning process has been attracting attention for biomedical applications, in particular with scaffold fabrication for tissue engineering. In order to enhance cell attachment and proliferation on scaffolds, it is important to control fiber diameters to create an environment to which cells can attach, grow, and proliferate with ease. However, because electrospinning is a process with many parameters, it is particularly difficult to precisely control the diameter of the resulting fibers. Also, polymer powders or pellets melted in nozzles are typically used for melt electrospinning. However, a filament feeding melt electrospinning process has not been yet been implemented. In this study, we developed a melt electrospinning device which can feed PCL (Polycaprolactone, Mw: 80 000 g mol−1) filaments for advanced electrospun fiber diameter control. The PCL filaments were first fabricated by a small scale micro-compounder and then fed into the melting chamber of the electrospinning device. The system was then heated to a desired temperature, and the melt was extruded through a nozzle. The potential difference between the nozzle and counter electrode then drew down the PCL extrudate, creating fine microfibers. Temperature was controlled and monitored via a customized temperature control system. In order to control the dispensing of the PCL filaments, a customized control algorithm using NI (National Instruments) LabVIEW was used. In order to actively cool PCL filaments, a miniature computer fan was attached on the side of the melting chamber so that the filaments would not buckle. This paper reveals the investigation of significant process parameters that influence fiber diameters and their optimization. For instance, applied voltages, distances between the nozzle and a counter electrode, processing temperatures, and polymer resin flowrates were varied. We also studied and summarized the effect of duty cycle—a ratio of forward and backward motions of the filament within a cycle time—for advanced fiber diameter control. Moreover, the relationship between a flow rate and a duty cycle and their influences on a fiber diameter were studied.

Correlating the 3D melt electrospun polycaprolactone fiber diameter and process parameters using neural networks

Artificial Neural Network Modeling for Predicting Melt Blowing Processing

Simulating the drawing of spunbonding nonwoven process using an artificial neural network technique

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Predicting the Fibre Diameter of Melt Blown Nonwovens: Comparison of Physical, Statistical and Artificial Neural Network Models

A study on theoretical predictive model and experimental findings of melt‐electrospinning process

Inspecting Process-Diameter Relationships of Forcespun PVP Ultrafine Fibers via RSM and ANN-PCA Approaches

Artificial Neural Networks for Predicting the Diameter of Electrospun Nanofibers Synthesized from Solutions/Emulsions of Biopolymers and Oils

Quality Prediction and Abnormal Processing Parameter Identification in Polypropylene Fiber Melt Spinning Using Artificial Intelligence Machine Learning and Deep Learning Algorithms

Effects of Six Processing Parameters on the Size of PCL Fibers Prepared by Melt Electrospinning Writing

Prediction of the fiber diameter of melt electrospinning writing by kriging model

The role of 3D electrostatic field in modeling the electrospinning process

The effect of nozzle-exit-channel shape on resultant fiber diameter in melt-electrospinning

Artificial neural networks for the accurate prediction of the thickness of fiber membranes prepared by airflow‐assisted electrostatic spinning

Process optimization of electrospun polycaprolactone and nanohydroxyapatite composite nanofibers using response surface methodology

Reverse engineering and analysis of microstructure polymer fiber via artificial neural networks: simplifying the design approach

Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique

Central Composite Design and Response Surface Methodology for Optimizing the Diameter of Electrospun Polyamide-6,6 Nanofiber Mat

Melt electrospinning process optimization of polylactic acid nanofibers

Experimental study and prediction of the diameter of melt-electrospinning polypropylene fiber

Machine learning assisted mechanical properties prediction of fine denier polyester fiber