Abstract:Since the photo electrochemical cell was used in the conversion of the solar energy to the electrical power or to hydrogen, more and more attention has been paid in this field. The photocathode plays an important roll in the electrochemical chain of PEC. In this paper, the p-n junction was used to improve efficiency of the photocathode because the inner electric field of the p-n junction can make the photo-generated carriers separate more easily. The NiO electrode and the NiO-TiO2 hybrid electrode were fabricated on the SnO2∶F (FTO) transparent conducting glass via sol-gel method. The solution was prepared by using the nickel acetate tetra hydrate and the tetra-n-butyl tianate as precursors. The films were obtained by spin-coating method and then annealed at 450 ℃ in air for three hours. The crystal structures of the films were characterized by X-ray diffraction (XRD). Scanning electron microscopy (SEM) was also used to investigate the microstructures of the films. The XRD results showed that all the strongest peaks were indexed to the anatase TiO2 and the bunsenite NiO, respectively. From SEM, the surface of the film was quite compact, the grains were nanometer-sized and the thicknesses of NiO and TiO2 layer were 200 nm and 130 nm, respectively. Moreover, the photoelectrochemical properties of the NiO and the NiO-TiO2 hybrid electrode were also investigated under 500 W Xe arc lamp illumination. It was found that the cathode photocurrent of the NiO-TiO2 hybrid electrode was larger than that of the NiO electrode and that the flat-band potential of the hybrid electrode was also more positive than that of NiO electrode. Therefore, the results indicated that the photo-generated carriers could be separated and transferred more easily for the build-in electric field of the p-n junction. Besides, an energy band diagram of the p-n junction was proposed to explain the results in this paper.

Interface structure of PN junctions in NiO–WO 3 –FTO photoelectrode for efficient DSSCs and enhanced photoresponses

Enhanced Open-Circuit Photovoltage and Charge Collection Realized in Pearl-Like NiO/CuO Composite Nanowires Based P-Type Dye Sensitized Solar Cells

Dissymmetric interface design of SnO2/TiO2 side-by-side bi-component nanofibers as photoanodes for dye sensitized solar cells: Facilitated electron transport and enhanced carrier separation

Solution-processed Nanoporous NiO-dye-ZnO Photocathodes: Toward Efficient and Stable Solid-State P-Type Dye-Sensitized Solar Cells and Dye-Sensitized Photoelectrosynthesis Cells

Enhanced Photocurrent Density by Spin-Coated NiO Photocathodes for N-Annulated Perylene-Based P-Type Dye-Sensitized Solar Cells

Modulating the 0D/2D Interface of Hybrid Semiconductors for Enhanced Photoelectrochemical Performances

Manipulating the Interfacial Energetics of N-Type Silicon Photoanode for Efficient Water Oxidation.

Application of p-n Junction in the Hybrid Photocathode

Silicon Photoanodes Partially Covered By Ni@Fe Core-Shell Particles With In Situ Formed Gradient-Enhanced Junction Electric Field For Photoelectrochemical Water Oxidation

Energy Band Transition and Voltage Compensation via Surface Stoichiometry Alteration in p-Type Dye-Sensitized Solar Cells

Hierarchical NiO/CMK-3 Photocathode for a P-Type Dye-Sensitized Solar Cell with Improved Photoelectrochemical Performance and Fast Hole Transfer

Realizing Efficient Photoelectrochemical Performance for Well-Designed CdS@ZnIn2S4 Heterostructure Photoanode with Directional Interfacial Charge Transfer Dynamics

Interfacial nitrogen modulated Z-scheme photoanode for solar water oxidation

An optimized Fe3O4/Fe2O3 PN junction photoelectrode with multiscale structure and broad spectrum absorption

Enhancement of photocurrent of dye-sensitized solar cell by composite liquid electrolyte including NiO nanosheets.

Cascading Interfaces Enable N-Si Photoanode for Efficient and Stable Solar Water Oxidation.

Highly Efficient NiFe Nanoparticle Decorated Si Photoanode for Photoelectrochemical Water Oxidation

NiO-decorated Mesoporous TiO2 Flowers for an Improved Photovoltaic Dye Sensitized Solar Cell

The use of nickel oxide as a hole transport material in perovskite solar cell configuration: Achieving a high performance and stable device

ZnO@NiO Core-Shell Heterojunction Photoanode Modified with NiOOH Co-Catalyst for High-Performance Self-Powered Photoelectrochemical-Type UV Photodetector

A novel tri-layered photoanode of hierarchical ZnO microspheres on 1D ZnO nanowire arrays for dye-sensitized solar cells