Abstract:Since the photo electrochemical cell was used in the conversion of the solar energy to the electrical power or to hydrogen, more and more attention has been paid in this field. The photocathode plays an important roll in the electrochemical chain of PEC. In this paper, the p-n junction was used to improve efficiency of the photocathode because the inner electric field of the p-n junction can make the photo-generated carriers separate more easily. The NiO electrode and the NiO-TiO2 hybrid electrode were fabricated on the SnO2∶F (FTO) transparent conducting glass via sol-gel method. The solution was prepared by using the nickel acetate tetra hydrate and the tetra-n-butyl tianate as precursors. The films were obtained by spin-coating method and then annealed at 450 ℃ in air for three hours. The crystal structures of the films were characterized by X-ray diffraction (XRD). Scanning electron microscopy (SEM) was also used to investigate the microstructures of the films. The XRD results showed that all the strongest peaks were indexed to the anatase TiO2 and the bunsenite NiO, respectively. From SEM, the surface of the film was quite compact, the grains were nanometer-sized and the thicknesses of NiO and TiO2 layer were 200 nm and 130 nm, respectively. Moreover, the photoelectrochemical properties of the NiO and the NiO-TiO2 hybrid electrode were also investigated under 500 W Xe arc lamp illumination. It was found that the cathode photocurrent of the NiO-TiO2 hybrid electrode was larger than that of the NiO electrode and that the flat-band potential of the hybrid electrode was also more positive than that of NiO electrode. Therefore, the results indicated that the photo-generated carriers could be separated and transferred more easily for the build-in electric field of the p-n junction. Besides, an energy band diagram of the p-n junction was proposed to explain the results in this paper.

Application of p-n Junction in the Hybrid Photocathode

Facile Construction TiO2/ZnIn2S4/Zn0.4Ca0.6In2S4 Ternary Hetero-Structure Photo-Anode with Enhanced Photo-Electrochemical Water-Splitting Performance

In Situ Synthesis of Ti:Fe2O3/Cu2O P-N Junction for Highly Efficient Photogenerated Carriers Separation

Piezoelectric‐Effect‐Enhanced Full‐Spectrum Photoelectrocatalysis in P–n Heterojunction

Photoelectrochemical performance enhanced by a nickel oxide-hematite p-n junction photoanode.

Dual Role of Surface Hydroxyl Groups in the Photodynamics and Performance of NiO-Based Photocathodes

Enhancing Photoelectrochemical Hydrogen Production Of A N(+)P-Si Hetero-Junction Photocathode With Amorphous Ni And Ti Layers

Interface structure of PN junctions in NiO–WO 3 –FTO photoelectrode for efficient DSSCs and enhanced photoresponses

High Performance N + P-Si/ti/nis X O Y Photocathode for Photoelectrochemical Hydrogen Evolution in Alkaline Solution

Relation Between the Photocatalytic and Photoelectrocatalytic Performance for the Particulate Semiconductor-Based Photoconversion Systems with Surface Phase Junction Structure

Utilizing the Built-in Electric Field of P-N Heterojunction to Spatially Separate the Photogenerated Charges in C, N Co-Doped Co3O4/CdS Photocatalysts

In-situ phosphating to synthesize Ni2P decorated NiO/g-C3N4 p-n junction for enhanced photocatalytic hydrogen production

Modulating the Charge-Transfer Step of a p-n Heterojunction with Nitrogen-Doped Carbon: A Promising Strategy To Improve Photocatalytic Performance

Rational Construction P-N Heterojunction Ni(OH)2/NiS2 on G-C3n4 Nanosheet to Promote the Charge Carriers Separation Efficiency for Boosting Photocatalytic Hydrogen Evolution

Activating a TiO 2 /BiVO 4 Film for Photoelectrochemical Water Splitting by Constructing a Heterojunction Interface with a Uniform Crystal Plane Orientation

Engineering MoS X /ti/inp Hybrid Photocathode for Improved Solar Hydrogen Production

Significantly Enhanced Charge Transfer Efficiency and Surface Reaction on NiP 2 /G-C 3 N 4 Heterojunction for Photocatalytic Hydrogen Evolution

High-Efficiency Inp-Based Photocathode For Hydrogen Production By Interface Energetics Design And Photon Management

Facile Fabrication of Organic/inorganic Nanotube Heterojunction Arrays for Enhanced Photoelectrochemical Water Splitting.

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Inorganic Nanotube/Organic Nanoparticle Hybrids for Enhanced Photoelectrochemical Properties