Abstract:Tuning the parameters of Computerized Numerical Control (CNC) is essential for practical manufacturers. Well configured parameters ensure the efficiency of production and the accuracy of the products. However, with the abrasive wear on the flank of the milling cutter, the milling processing parameters should re-configure to adapt to the increment of the abrasive wear. This paper aims to propose a method to predict the abrasive wear rate increment on the flank of the milling cutter and optimize the processing parameters of CNC milling. Firstly, we set a cutting data acquisition system to sample the processing time and cutting force among X, Y coordinates based on the five-factor and four-level orthogonal experiments. Then, the sampled cutting force data increment is transformed into the abrasive wear rate increment by applying the incremental model. Next, five processing parameters for CNC milling are optimized by the gray relational method, which takes the limited abrasive wear rate increment of the flank face and the non-increasing processing time as the constrained conditions. We obtain the relationship between five processing parameters and abrasive wear rate increment. We also find the basic principle of selecting process parameters is to reduce the abrasive wear rate without increasing the processing time. The experimental results verify that the optimized process parameters make the gray relational degree increase by 0.02, and the abrasive wear rate increment decreases by 0.42432 × 10 −10 mm 3 /s without affecting the production efficiency. In the prediction section, by applying the Back Propagation (BP) neural network, we obtain an accurate prediction model from measurable five factors to the abrasive wear increment on the flank of the milling cutter. The maximum error between the predicted value and the actual value is 0.0003, and the predicted value curve fits well with the actual value curve. From the perspective of abrasive wear rate increment prediction, it provides a new idea for online tool wear monitoring.

Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Machine learning cutting forces in milling processes of functionally graded materials

Prediction of cutting force via machine learning: state of the art, challenges and potentials

A Hybrid Approach for Cutting Force Prediction in Flank Milling Based on Analytical and 3D Finite Element Method

Stochastic Cutting Force Modeling and Prediction in Machining

Investigation on eXtreme Gradient Boosting for cutting force prediction in milling

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Finite element based model for predicting induced residual stresses and cutting forces in AISI 1020 steel alloy

Predicting Milling Force Variation in Time and Space Domain for Multi-Toothed Face Milling

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

Force prediction in ultrasonic vibration-assisted milling

Optimization of milling process parameters and prediction of abrasive wear rate increment based on cutting force experiment

Prediction of Cutting Forces in Milling of Circular Corner Profiles

A Review of Proposed Models for Cutting Force Prediction in Milling Parts with Low Rigidity

Prediction of Cutting Forces in Flank Milling of Parts with Non-Developable Ruled Surfaces

Improved random forest for titanium alloy milling force prediction based on finite element-driven

Modeling of Cutting Forces During Machining