Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

Experimental and theoretical studies on the reactivity and reaction mechanism of LaMnO 3 with CO in chemical looping combustion

Experimental and theoretical insights into the reaction mechanism of spinel CuMn2O4 with CO in chemical-looping combustion

Insight into the synergy effect on the improved reactivity of spinel NiMn2O4 oxygen carrier in chemical looping combustion

Chemical-looping Reforming of Methane over La-Mn-Fe-O Oxygen Carriers: Effect of Calcination Temperature

Lattice oxygen behaviors of Mn-based catalytic oxygen carriers and sustainable oxidative coupling of methane in chemical-looping scheme

Enhanced C2+ Selectivity in Plasma-assisted Chemical Looping Oxidative Coupling of Methane using (Na, Li, and K) doped LaMnO3

Reduction Kinetics of SrFeO3−δ/CaO·MnO Nanocomposite As Effective Oxygen Carrier for Chemical Looping Partial Oxidation of Methane

Plasma-Assisted Chemical Looping Oxidative Coupling of Methane over LaMnO 3 at 400 °C

PERFORMANCE STUDY OF LaFe1-xCoxO3 AS OXYGEN CARRIERS IN CHEMICAL-LOOPING COMBUSTION REACTION

Theoretical Study of the Reactive Mechanisms of Li-Doped Ni-Based Oxygen Carrier during Chemical Looping Combustion

Experimental and theoretical insights into the mechanism of spinel CoFe2O4 reduction in CO chemical looping combustion

Effect of Cu Doping on the Structure and Catalytic Activity of LaMnO_3 Catalyst

Catalytic Combustion of Vinyl Chloride over Sr Doped LaMnO3

Enhanced Activity of La1-xMnCuxO3 Perovskite Oxides for Chemical Looping Steam Methane Reforming

Nanoscale structural transformations in LaFeO 3 oxygen carriers for enhanced reactivity in chemical looping combustion

A catalytic reaction scheme for NO reduction by CO over Mn-terminated LaMnO3 perovskite: A DFT study

Facile One-Step Flame Synthesis of La1−xSrxMnO3 Nanoparticles for CO Catalytic Oxidation

Revealing co-promotion mechanism of Mn/Ca3Al2O6 on CO2 adsorption performance of CaO in calcium looping by density functional theory

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Effect of Different Reaction Conditions on Catalytic Activity of La(Mn, Fe)O3+lambda Catalyst for Methane Combustion

Investigation on the Catalytic Combustion of CO over LaMn 1‐ X Cu X O 3 Promoted by Acid Treatment