Abstract:The deformation-induced surface roughening of an Al-Mg alloy is analyzed using a combination of experiments and modeling. A mesoscale oligocrystal of AA5052-O, obtained by recrystallization annealing and subsequent thickness reduction by machining, that contains approx. 40 grains is subjected to uniaxial tension. The specimen contains one layer of grains through the thickness. A laser confocal microscope is used to measure the surface topography of the deformed specimen. A finite element model with realistic (non-columnar) shapes of the grains based on a pair of Electron Back-Scatter Diffraction (EBSD) scans of a given specimen is constructed using a custom-developed shape interpolation procedure. A Crystal Plasticity Finite Element (CPFE) framework is then applied to the voxel model of the tension test of the oligocrystal. The unknown material parameters are determined inversely using an efficient, custom-built optimizer. Predictions of the deformed shape of the specimen, surface topography, evolution of the average roughness with straining and texture evolution are compared to experiments. The model reproduces the averaged features of the problem, while missing some local details. As an additional verification of the CPFE model, the statistics of surface roughening are analyzed by simulating uniaxial tension of an AA5052-O polycrystal and comparing it to experiments. The averaged predictions are found to be in good agreement with the experimentally observed trends. Finally, using the same polycrystalline specimen, texture–morphology relations are discovered, using a symbolic Monte Carlo approach. Simple relations between the Schmid factor and roughness can be inferred purely from the experiments. Novelties of this work include: realistic 3D shapes of the grains; efficient and accurate identification of material parameters instead of manual tuning; a fully analytical Jacobian for the crystal plasticity model with quadratic convergence; novel texture–morphology relations for polycrystal.

A Study on Surface Quality and Mechanical Property Improvement Through Mechanical Surface Treatment of Amorphous Metal

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Surface characteristics improvement methods for metal additively manufactured parts: a review

Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification

Surface Roughening Behavior and Mechanism in Aluminum Alloy Under Tensile Deformation

Study on Microstructure Evolution Mechanism of Gradient Structure Surface of AA7075 Aluminum Alloy by Ultrasonic Surface Rolling Treatment

Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient

Effect of Surface Mechanical Attrition Treatment on Surface Topography and Dry Sliding Wear Performance of AA7075‐T6

Investigation on Deformation Behavior in the Surface of Metal Foil with Ultrasonic Vibration-Assisted Micro-Forging

Gradient-structured 1060 aluminum by air pressure-driven surface mechanical rolling treatment and its effects on the friction performance

Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities

Effect of recrystallization annealing, solid solution and pre-aging intermediate treatment on microstructure and mechanical properties of Al-Mg-Si rolled sheet

Physical and Mechanical Properties of the Amorphous and Nanocrystalline Alloys

A novel method for determination of surface treatment effect on mechanical properties of titanium bulk material

Microstructural Modification and Tensile Behavior of IF Steel Processed through Surface Mechanical Attrition Treatment

Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys

Evaluation of fracture properties of annealed Fe–Si–B–Cr amorphous alloys using micro-tensile tests and blanking machinability

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Investigation on surface integrity of electron beam melted Ti-6Al-4 V by precision grinding and electropolishing

Effect of Metal Surface Topography on the Interlaminar Shear and Tensile Strength of Aluminum/Polyamide 6 Polymer-Metal-Hybrids