Abstract:Direct utilization of methane in solid oxide fuel cells (SOFCs) is greatly impeded by the grievous carbon deposition and the much depressed catalytic activity. In this work, a promising anode, taking finger-like porous YSZ as the anode substrate and impregnated Ni0.08Co0.02Ce0.9O2−δ@Ni0.8Co0.2O as the novel catalyst, is fabricated via the phase conversion-combined tape-casting technique. This anode shows commendable mechanical strength and excellent catalytic activity and stability toward the methane conversion reactions, which is attributed to the exsolved alloy nanoparticles and the active oxygen species on the reduced Ni0.08Co0.02Ce0.9O2−δ catalyst as well as the facilitated methane transport rooting in the special open-pore microstructure of the anode substrate. Strikingly, this button cell delivers an excellent peak power density of 730 mW cm–2 at 800 °C in 97% CH4/3% H2O fuel, only 9% lower than that in 97% H2/3% H2O. Our work shed new light on the SOFC anode developments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17339?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17339</a>.Pore size distribution of the YSZ backbone, XRD results of NCCO and NCO, TPR profile of NCCO, XPS spectra of Ce 3d in NCCO and NC-CeO2–x, TEM results of NCCO and NC-CeO2–x, I–V–P plots, EIS and SEM results of button cells, and SVUV-PIMS results of methane conversions (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17339/suppl_file/am0c17339_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improving electrochemical performance of (Cu, Sm)CeO2 anode with anchored Cu nanoparticles for direct utilization of natural gas in solid oxide fuel cells

Catalytic Modification of Ni–Sm-doped Ceria Anodes with Copper for Direct Utilization of Dry Methane in Low-Temperature Solid Oxide Fuel Cells

Anode Performance of Mn-doped Ceria–scsz for Solid Oxide Fuel Cell

Infiltrated Ni0.08Co0.02Ce0.02CeO2-x@Ni0.8Co0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Enhanced Sulfur and Carbon Coking Tolerance of Novel Co-Doped Ceria Based Anode for Solid Oxide Fuel Cells

Ni1−Cu alloy-based anodes for low-temperature solid oxide fuel cells with biomass-produced gas as fuel

Vacuum-assisted electroless copper plating on Ni/(Sm,Ce)O 2 anodes for intermediate temperature solid oxide fuel cells

Performance of Ce/Fe oxide anodes for SOFC operating on methane fuel

Ni1-xCux alloy-based anodes for low-temperature solid oxide fuel cells with biomass-produced gas as fuel

Infiltrated Ni 0.08 Co 0.02 CeO 2– x @Ni 0.8 Co 0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Enhanced coking resistance of a Ni cermet anode by a chromates protective layer

A Robust NiO–Sm0.2Ce0.8O1.9 Anode for Direct-Methane Solid Oxide Fuel Cell

Sm0.2(Ce1−xTix)0.8O1.9 Modified Ni–yttria-stabilized Zirconia Anode for Direct Methane Fuel Cell

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Cu-Ce0.8Sm0.2O2-δ anode for electrochemical oxidation of methanol in solid oxide fuel cell: Improved activity by La and Nd doping

Ceria coated Ni as anodes for direct utilization of methane in low-temperature solid oxide fuel cells

Performance of Ni/Scsz Cermet Anode Modified by Coating with Gd0.2ce0.8o2 for an Sofc Running on Methane Fuel

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells

Enhanced Coking Resistance of Ni Cermet Anodes for Solid Oxide Fuel Cells Based on Methane On‐cell Reforming by a Redox‐stable Double‐perovskite Sr 2 MoFeO 6‐Δ

An Efficient Construction of Nano-Interfaces for Excellent Coking Tolerance of Cermet Anodes