Abstract:Noble-metal nano-hole arrays that generate EOT phenomenon are a promising label-free surface plasmon resonance (SPR) biochemical sensor [1]. Cellular response detection by other SPR sensors (Kretschmann prism and photonic crystal) has been successful [2]. However, limited by the high cost of earlier nano-hole fabrication techniques such as FIB/EBL, the EOT-based biochemical sensors had only ~10x10 μm scale of nano-holes and thus were applied mostly in detecting molecules [1], which need only a small area of sensing elements. Recently, a template-stripping technique to fabricate large area (~1x1 cm) of nano-holes was reported [3], which enables EOT-based measurement of cellular events. Prior studies [4] showed that the cell adhesion on the nano-holes can result in a change in effective refractive index (RI), which, in turn, leads to a spectral shift in the transmission peak. Therefore, we hypothesize that the EOT-based sensors are capable of label-free monitoring the cellular effects of toxic chemicals that change cell adhesion conditions. The integrated microfluidic device and measuring system shown in Fig. 1 was used to monitor the cellular response quantified by the EOT spectral shift in association with chemical stimuli. Gold film perforated with nano-hole arrays on a glass substrate was fabricated by depositing 100-nm-thick gold on a nano-hole-patterned silicon template and template-stripped onto the glass slide with UV curable epoxy [3]. PDMS microfluidic channels with an inlet and an outlet were fabricated by soft lithography and align-bonded with a gold-film-coated glass slide. After washing and sterilization of the device, cells were cultured on the cystimine-modified gold surface till confluent. Then the device was placed under a microscope connected to a spectrometer to record the spectral response (Fig. 2) to chemical stimuli applied via the microfluidic channels. Using the spectrum at t=0 as baseline, the spectral shift at different times was acquired as a function of the chemical concentration. In addition to chemical stimuli reported here, the same system can be used to characterize the cell response to electrical stimuli in the future. We applied three types of chemical stimuli to HEK293 cells in experiments. The first was trypsin that breaks the collagen links between cells and the substrate. Fig. 3 shows the spectral shift for 0.05% trypsin in PBS. The spectral shift has a logarithmic time dependence, which fits well with the first order reaction mode of enzyme. The spectrum was blue-shifted because the effective RI near gold surface decreased as the cell were gradually detached from the substrate. The second stimulus was lipopolysaccharide (LPS), which is a cell toxic chemical known to flatten and expand cells. Fig. 4 plots the spectral shift for different concentrations of LPS, showing a red-shifted spectrum with increased time and concentration, which was attributed to a greater RI near the sensor surface due to increased cell adhesion on the gold nano-holes. The third stimulus was sodium azide, which, in contrast to LPS, makes cells to transform and shrink. As expected, the spectrum in Fig. 5 was blue-shifted, since the effective RI dropped in response to weaker cell adhesion. These results demonstrate the capability of our EOT-based microfluidic biosensor for label-free monitoring of cellular responses to external stimuli.

Non-constrictive bead immobilization leading to decreased and uniform shear stress in microfluidic bead-based ELISA

Improved Surface Modification Approach for Micromechanical Biosensors

Rare Cell Immobilization on MEMS Scale Sensors Using Micro-Electromagnets

Elasticity-Modulated Microbeads for Classification of Floating Normal and Cancer Cells Using Confining Microchannels

A multiplexed immuno-sensor for on-line and automated monitoring of tissue culture protein biomarkers

Electrospun polyethersolfone nanofibrous membrane as novel platform for protein immobilization in microfluidic systems

Development of a capillary flow microfluidic Escherichia coli biosensor with on-chip reagent delivery using water-soluble nanofibers

Selective Protein Immobilization Via Dna Conjugation under Microfluidic Laminar Flow

Liquid-like Polymer Coating as a Promising Candidate for Reducing Electrode Contamination and Noise in Complex Biofluids

In situ monitoring of fluid shear stress enhanced adherence of bacteria to cancer cells on microfluidic chip.

<span><strong>A NANO-PLASMONIC MICROFLUIDIC BIOSENSOR FOR LABEL-FREE MONITORING OF LIVING CELL RESPONSE TO CHEMICALS</strong></span>

Enhancement of Binding Kinetics on Affinity Substrates Using Asymmetric Electroosmotic Flow on a Sinusoidal Bipolar Electrode

Microfluidic channel sensory system for electro-addressing cell location, determining confluency, and quantifying a general number of cells

Transient Deflection Response in Microcantilever Array Integrated with Polydimethylsiloxane (PDMS) Microfluidics.

In-situ monitoring of cell-secreted lactate by electrochemiluminescence sensing under biomimetic microfluidic confinement

Zwitterionic Electrochemiluminescence Biointerface Contributes to Label‐Free Monitoring of Exosomes Dynamics in a Fluidic Microreaction Device

Development of a capillary flow microfluidic biosensor with on-chip reagent delivery using water-soluble nanofibers

Automated microfluidic platform of bead-based electrochemical immunosensor integrated with bioreactor for continual monitoring of cell secreted biomarkers

A single-particle mechanofluorescent sensor

Ultrasensitive, Multiplexed Buoyant Sensor for Monitoring Cytokines in Biofluids

Microfluidic synthesis and accurate immobilization of low-density QD-encoded magnetic microbeads for multiplex immunoassay