Abstract:This paper presents a comprehensive study on the numerical and experimental simulation of smooth blasting in limestone. The calibration of the numerical model was initiated through Brazilian and uniaxial compression tests on limestone samples. Compressive strength and Brazilian tensile strength of limestone were 70 MPa and 8 MPa. This enabled the determination of essential micro-parameters. Subsequently, smooth blasting scenarios were simulated under two distinct conditions: with and without confinement. Under confinement conditions, models with dimensions of 600 mm * 900 mm were constructed. The blasting hole was strategically positioned at varying distances from the free boundary, accompanied by a row of parallel holes positioned behind it. A confining pressure of 10 MPa was applied. Appropriate values for normal and shear damping, as well as the allocation of a viscous boundary, were established. Normal and shear damping values were equal to 0.4 and 0.3, respectively. Throughout different stages of blasting, critical parameters such as crack growth patterns, particle velocity, and induced loads near the blasting hole were meticulously recorded. Measuring circles were strategically placed in proximity to both the blasting hole and free boundary to capture induced forces. Parallel to the numerical simulations, an unconfined experimental test was conducted on limestone samples with similar dimensions. However, it was observed that the reflected tensile stress wave at the surface of the empty hole exacerbated damage to the rock mass between the blast hole and the empty holes. The presence of multiple empty holes significantly influenced the extension of the blasting-induced main fracture. Various factors, including the distance between the explosion source and the empty holes, played a pivotal role in the reflection tensile failure on the surface with no holes. Furthermore, it was found that increasing the separation between the empty holes and the blasting hole led to a reduction in kinetic energy and high friction energy. Conversely, widening the blasting holes amplified both peak friction energy and kinetic energy. Elevating the confining pressure resulted in a decrease in both peak friction energy and kinetic energy, while simultaneously increasing the strain energy. Additionally, extending the distance between the blasting hole and the free border led to a reduction in flying rock. Confining the area had a dual benefit of reducing induced force and mitigating the quantity of flying rock. The results from the experimental test and numerical simulation exhibited a consistent trend.

Poromechanical approach to blast‐induced dynamic fracture in concrete

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Modelling damage mechanisms of concrete under high confinement pressure

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Peridynamics simulations of the damage of reinforced concrete structures under radial blasting

Spallation Mechanism of RC Slabs under Contact Detonation

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

Dynamic fracture of concrete in compression: 3D finite element analysis at meso- and macro-scale

Discrete element method simulations of fracture in concrete under uniaxial compression based on its real internal structure

Phase-Field Based Peridynamics Implementation to Model Blast-Induced Fracture in Brittle Solids

Demolition of concrete by thermal shock spallation: a mesoscopic numerical study based on embedded discontinuity finite elements

Explosion damage analysis of concrete structure with bond-associated non-ordinary state-based peridynamics

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading

Simulating the break-up, debris formation and throw of concrete structures under explosive loading

Investigation of fracture mechanisms in smooth blasting of limestone samples: numerical and experimental approaches

Dynamic response and constitutive model of damaged sandstone after triaxial impact

Explosive Shapes in Smoothed-Particle Hydrodynamics (SPH) Method for Structural Analysis of Concrete Members