Abstract:Quantitative evaluations of blasting damage evolutions of concrete structures are the premise of improving the design codes of concrete blasting engineering. However, traditional numerical methods have some limitations in dealing with the large deformation and discontinuity problems during concrete blasting. In view of this, the improved SPH momentum equation considering blasting load is derived. The "birth and death coefficient" χ is defined, and the traditional SPH smoothing kernel function is then improved, thus realizing the simulations of dynamic blasting damage evolutions under the SPH framework. The methods of determining the concrete meso-structures as well as distinguishing different materials are proposed, which can realize the generations of SPH particles such as aggregates, interfacial transition zones and pores. Firstly, four typical numerical examples are simulated: (1) blasting damage evolution model with one blast hole and one 45° prefabricated fissure; (2) blasting damage evolution model with one blast hole and three parallel prefabricated fissures; (3) blasting damage evolution model with one blast hole, one vertical prefabricated fissure and one horizontal prefabricated fissure; and (4) blasting damage evolution model with two blast holes, two empty holes and two prefabricated fissures. The numerical results are compared with previous experimental results to verify the correctness of the improved method. Then, the concrete mesoscopic blasting damage models are established, and the blast damage evolution processes under different concrete mesoscopic structure properties as well as different dynamic blasting parameters are simulated, and results show that: (1) The blasting cracks are limited around the blast hole when the aggregate content is larger, while when the aggregate content is smaller, the blasting cracks expand to the model boundary by propagating around the aggregates. The increase in the pore content leads to a different crack propagation mode: combinations of crack propagating around the aggregates and connecting the pores. (2) The increase of peak stress wave value and blast stress loading rate leads to the increase in the damage degree around the blast hole, but decrease in the damage degree of the whole model. (3) The damage counts increase rapidly in the initial stage of blasting, but maintain a low level in the later stage when the aggregate content is larger, while it is the opposite when the aggregate content is smaller. The increase in the pore content leads to the decrease in the model damage degree. (4) The dynamic blasting parameters donate less effects on concrete damage counts, and the blasting damage counts decrease with the increase in the peak stress wave value and the loading rate.

Simulating the break-up, debris formation and throw of concrete structures under explosive loading

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Spallation Mechanism of RC Slabs under Contact Detonation

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Modelling Structural Failure with Finite Element Analysis of Controlled Demolition of Buildings by Explosives Using LS-DYNA

Fluid-structure coupled simulation framework for lightweight explosion containment structures under large deformations

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Explosive Shapes in Smoothed-Particle Hydrodynamics (SPH) Method for Structural Analysis of Concrete Members

Multi-Scale Analysis Of Damage Process For Concrete Structures

Demolition of concrete by thermal shock spallation: a mesoscopic numerical study based on embedded discontinuity finite elements

The effect of an explosive shock wave on the plate of a protective structure of a critical infrastructure

Peridynamics simulations of the damage of reinforced concrete structures under radial blasting

Concrete Spalling Behavior and Damage Evaluation of Concrete Members with Different Cross-sectional Properties under Contact Explosion

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading

A total Lagrange meshless method for modeling the concrete damage evolutions under blast loading

Modeling the Interaction of Proximal Fragments for Destructive Atmospheric Entry Analysis

A simulation approach for quantifying ballistic impact damage in ultra-high-performance concrete

Computational Analysis of Bubble-Structure Interactions in Near-Field Underwater Explosion