Abstract:A newly developed nonlinear ultrasonic (NLU) technique called sideband band peak count-index (or SPC-I) measures the degree of nonlinearity in materials by counting the sideband peaks above a moving threshold line - larger the SPC-I values, higher is the material nonlinearity. In various published papers, the SPC-I technique has shown its effectiveness in structural health monitoring (SHM) applications. However, the effects of different types of nonlinear phenomenon on the sideband peak generation is yet to be investigated in depth. This work addresses this knowledge gap and investigates the effects of different types of nonlinearity on the SPC-I technique. Three types of nonlinearity (material nonlinearity, structural nonlinearity and contact nonlinearity) are investigated separately through numerical modeling. In this investigation the material nonlinearity and the contact nonlinearity are modeled by finite element method (FEM) using the commercial Abaqus/CAE software. The structural nonlinearity arising from stationary cracks is modeled using nonlocal peridynamics based peri-ultrasound modeling technique. Numerical modeling shows that the sideband peak values do not increase proportional to the input signal strength thus indicating nonlinear response, and different types of nonlinearities affect the SPC-I measurements differently. For the experimental verification a composite plate with impact-induced damage is considered for investigating the material nonlinearity and structural nonlinearity while a linear elastic aluminum plate is used to examine the contact nonlinearity between the transducers and the plate. The trends observed in the experimental observations matched with the numerical model predictions.

Nonlinear effects and applications of AlN: A comprehensive physical formulation approach

Effects of Surface/interface Stress on Phonon Properties and Thermal Conductivity in AlN/GaN/AlN Heterostructural Nanofilms

Nonlinear Thermo-Electro-mechanical Responses and Active Control of Functionally Graded Piezoelectric Plates Subjected to Strong Electric Fields

On the Role of Piezoelectricity in Phonon Properties and Thermal Conductivity of GaN Nanofilms

On nonlinear 3D electro-elastic numerical modeling of two-phase inhomogeneous FG piezocomposites reinforced with GNPs

Investigation of Nonlinearity in RF Metal Contacts Induced by the Tunneling Effect

Simulating Stress-Tunable Phonon and Thermal Properties in Heterostructured AlN/GaN/AlN-nanofilms

Nonlinear Piezothermoelasticity and Multi-Field Actuations, Part 1: Nonlinear Anisotropic Piezothermoelastic Shell Laminates

Tuning the piezoelectric and mechanical properties of the AlN system via alloying with YN and BN

Systematic approach for high piezoelectric AlN deposition

Nonlinear magnetoelectric effects in a composite piezomagnetic–piezoelectric semiconductor structure

Machine learning-assisted design of AlN-based high-performance piezoelectric materials

Structural evolution of the elastic properties in nano-structured AlN film

Aluminum nitride photonic integrated circuits: from piezo-optomechanics to nonlinear optics

Numerical Evaluation of the Elastic Moduli of AlN and GaN Nanosheets

Finite element modeling and analysis of piezo-integrated composite structures under large applied electric fields

Mixed Nonlinear Response and Transition of Nonlinearity in a Piezoelectric Membrane

Nonlinear electro-elastic finite element analysis with neural network constitutive models

Numerical modeling with experimental verification investigating the effect of various nonlinearities on the sideband peak count-index technique

Nonlocal nonlinear analysis of functionally graded piezoelectric porous nanoplates