Abstract:Working fluids that incorporate solid microencapsulated phase change materials (MPCMs) can benefit from properties such as density and viscosity, which are crucial for improving heat capacity and transfer. However, limited data are available on these parameters for specific slurry and mass ratios. In this study, we present a comparative analysis of the experimental results on the viscosity of three different MPCM aqueous dispersions, namely MPCM 31-S50, MPCM 25-S50, and Micronal 5428X. Varying MPCM mass ratios of distilled water were used to obtain different mass concentrations of the phase change material (PCM), and the resulting slurries were analysed at temperatures ranging from 15 to 40 °C. Our findings showed that all slurries exhibited non-Newtonian characteristics at low shear rates, with viscosity stabilising at higher shear rates, resulting in the characteristics of a Newtonian fluid. The viscosity results were highly dependent on the type of MPCM base dispersion, particularly at high mass ratios, with the slurries having viscosities higher than those of water. Furthermore, we conducted density experiments as a function of temperature, using a flow test setup and a Coriolis flowmeter (Endress+Hauser, Reinach, Switzerland) to determine the density of two MPCMs, namely MPCM 25-S50 and Micronal 5428X. The test samples were prepared at mass concentrations of 10%, 15%, and 20% of the phase change material. We found significant differences in density and viscosity for different MPCM slurries as a result of both the PCM concentration and the material studied. Our results also revealed an apparent PCM phase change process, in which the slurry density significantly decreased in the temperature range of the phase transition from solid to liquid.

Heat-transfer characteristics of the two-phase-change process between a microencapsulated phase-change-material-slurry droplet and air: A numerical study

Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in Laminar Flow under Constant Heat Flux

An Experimental Study of the Latent Functionally Thermal Fluid with Micro-Encapsulated Phase Change Material Particles Flowing in Microchannels

Heat transfer of microencapsulated PCM slurry flow in a circular tube

Numerical Investigation on Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in a Rectangular Minichannel

Study on flow and heat transfer characteristics of Encapsulated Phase Change Material (EPCM) slurry in Double-Pipe Heat Exchanger

Exploration of Dual-Phase Change Coupled Heat Transfer in Solar Regenerative Evaporator

An Experimental Study of Convective Heat Transfer with Microencapsulated Phase Change Material Suspension: Laminar Flow in A Circular Tube under Constant Heat Flux

Flow and heat transfer behaviors of phase change material slurries in a horizontal circular tube

EXPERIMENTAL RESEARCH ON LAMINAR FORCED CONVECTION HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SUSPENSION

Experimental Investigation On Laminar Forced Convection Heat Transfer Enhancement Of Microencapsulated Phase Change Suspension With Constant Heat Flux

Heat Transfer Charaterisitcs Of Laminar Miroencapsulated Phase Change Material Slurries Flow In A Circular Pipe

Thermal performance of microencapsulated phase change material slurry in helical coils with reversed loops and wire coil inserts

Numerical Flow Characteristics of Microencapsulated Phase Change Slurry Flowing in a Helically Coiled Tube for Thermal Energy Storage

Numerical Evaluation on the Flow and Heat Transfer Characteristics of Microencapsulated Phase Change Slurry Flowing in a Circular Tube

Heat transfer enhancement performance of microencapsulated phase change materials latent functional thermal fluid in solid/liquid phase transition regions

Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review

Dynamic Heat Transfer Characteristics Modeling of Microencapsulated Phase Change Material Slurries

Dynamic Thermal Characteristics Analysis of Microencapsulated Phase Change Suspensions Flowing Through Rectangular Mini-Channels for Thermal Energy Storage

Experimental Investigation of the Viscosity and Density of Microencapsulated Phase Change Material Slurries for Enhanced Heat Capacity and Transfer

Heat transfer performance by forced convection of microencapsulated phase change material-latent functional thermal fluid flowing in a mini-channels heat sink