Abstract:Microencapsulation phase change material slurry (MEPCMS) becomes a potential working fluid for cooling high energy density miniaturized components, thanks to the latent heat absorption of particles in the heat transfer process. In this work, the Discrete Phase Model (DPM) based on the Euler-Lagrangian method is used to numerically investigate the convective heat transfer characteristics of MEPCMS flowing through a rectangular minichannel with constant heat flux. The results show that particles of MEPCMS are mainly subjected to drag force during the flow. Even so, they can migrate from the high-temperature region to the low-temperature region driven by the thermophoretic force, affecting the particle distribution and phase change process. Moreover, the Nu x of the MEPCMS fluctuates due to particle phase change with varying specific heat capacities. Specifically, the value increases first, then decreases, and eventually increases again until it approaches the fully developed value of the pure base fluid as the particles gradually melt. Furthermore, the heat transfer performance of the MEPCMS is influenced by the combination of fluid inlet temperature ( T in ), fluid inlet velocity ( v ), and mass concentration ( c m ) of MEPCM particles. The result shows that the maximum reduction of the maximum bottom wall temperature difference (Δ T w ) is 23.98% at T in =293.15 K, v =0.15 m·s −1 , c m =10%.

Dynamic Heat Transfer Characteristics Modeling of Microencapsulated Phase Change Material Slurries

Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in Laminar Flow under Constant Heat Flux

Numerical Flow Characteristics of Microencapsulated Phase Change Slurry Flowing in a Helically Coiled Tube for Thermal Energy Storage

Thermal Performance of Microencapsulated Phase‐Change Slurry in a Circular Tube for Heat Storage

Heat Transfer Charaterisitcs Of Laminar Miroencapsulated Phase Change Material Slurries Flow In A Circular Pipe

Numerical Evaluation on the Flow and Heat Transfer Characteristics of Microencapsulated Phase Change Slurry Flowing in a Circular Tube

Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review

Turbulent heat transfer enhancement of microencapsulated phase change material slurries with constant wall heat flux

Heat transfer of microencapsulated PCM slurry flow in a circular tube

Flow and heat transfer behaviors of phase change material slurries in a horizontal circular tube

Theoretical Analysis of Convective Heat Transfer Enhancement of Microencapsulated Phase Change Material Slurries

Characterization of thermal and hydrodynamic properties for microencapsulated phase change slurry (MPCS)

Numerical Investigation on Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in a Rectangular Minichannel

Simulation of Convective Heat Transfer in Magnetic Microencapsulated Phase Change Material Slurries in a Circular Tube

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Dynamic Thermal Characteristics Analysis of Microencapsulated Phase Change Suspensions Flowing Through Rectangular Mini-Channels for Thermal Energy Storage

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Thermal Performances Evaluation of a Flat‐plate Solar Collector Using Microencapsulated Phase‐change Slurry As Heat Transfer Medium

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Novel insight and numerical analysis of convective heat transfer enhancement with microencapsulated phase change material slurries: laminar flow in a circular tube with constant heat flux

Flow and heat transfer characteristics of microencapsulated phase change material slurry in bonded triangular tubes for thermal energy storage systems