Abstract:Featured by high power density and efficiency, high temperature superconducting (HTS) electric machines provide a promising solution to heavy-duty electric transport, e.g., electric aircraft. However, designing HTS machines, particularly high-speed HTS motors, presents significant challenges: 1) modelling is highly time-consuming due to the non-linear resistivity of superconductors and complex machine topology; 2) accurately estimating the AC loss of HTS windings remains an open aspiration due to the complicated AC environment. To reduce computational complexity, the thin film approximation (only considering the approximated 1-D HTS film) for HTS coated conductors (CCs) has been widely adopted in simulations, such as the T-formulation models; however, the thin film approximation becomes inadequate for HTS CCs under high-frequency magnetic fields, as encountered in high-speed motors for aerospace. To efficiently and accurately model the AC loss of HTS windings in high-speed superconducting machines, taking a 1 MW superconducting synchronous motor with HTS armature windings as an example, this paper has adopted a Time-Space Extrusion (TSE) method, which demonstrates a >25-fold decrease in modeling time while maintaining comparable accuracy to two benchmark H-A models. The power dissipation in both normal-conducting and superconducting layers of HTS windings has been studied, the AC losses in different turns of the armature winding have been explored, and the slot leakage field harmonics have been illustrated. Results have shown that the losses in Cu and Ag layers for high-speed HTS machines operating at cryo-temperatures (e.g., liquid hydrogen temperature) are not neglectable, especially with a high residual resistance ratio (RRR) and in the presence of harmonics. The HTS armature winding should be positioned away from the iron tooth and slot opening to minimise exposure to slot leakage fields. The adopted TSE modelling strategy and drawn conclusions have provided valuable insights for the efficient design of high-speed superconducting machines.

Two-dimensional model of a high-Tc superconducting dynamo

3D modeling of a Superconducting Dynamo-Type Flux Pump

3D electromagnetic modelling for high‐temperature superconducting dynamo flux pumps using T‐A formulation

A new benchmark problem for electromagnetic modelling of superconductors: the high-Tc superconducting dynamo

Modeling of Airgap Influence on DC Voltage Generation in a Dynamo-Type Flux Pump

HTS Dynamo Flux Pump: The Impact of a Ferromagnetic Stator Substrate

A Practical Superconducting DC Dynamo for Charging Conduction-Cooled HTS Magnet

3-D Eddy Current Analysis in the End Region of a Turbogenerator by Using Reduced Magnetic Vector Potential

Influence of Flux Pinning on the Open-Circuit Voltage of a Dynamo-Type High-Tc Superconducting Flux Pump

Hysteresis Loss Calculations of 2D and 3D Large-Scale HTS Coil Models: from Multi-Scale Method to Multi-Dimension Method

Design Of A Dual-Stator Superconducting Permanent Magnet Wind Power Generator With Different Rotor Configuration

Circuit Model for HTS Flux Pump With Flux Conservation, Dynamic Resistance, and Flux Flow

Hermite-Chebyshev pseudospectral method for inhomogeneous superconducting strip problems and magnetic flux pump modeling

Investigation of high-speed superconducting electric machines through time-space extrusion numerical modelling

Slow plasma dynamo driven by electric current helicity in non-compact Riemann surfaces of negative curvature

Helical and nonhelical large-scale dynamos in thin accretion discs

Magnetohydrodynamic Dynamo Effect from Electrostatic Drift Velocity Field on Sustainment of Reversed Field Pinch Plasmas in Three-Dimensional KTX Equilibrium

Oscillating Ponomarenko dynamo in the highly conducting limit

Dynamic Modeling and Simulation of a Super-High-Speed Circumferential-Flux Hysteresis Motor

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores