Abstract:Using the mixture of triethyl phosphate (TEP) and N,N-dimethylacetamide (DMAc) as solvent, PVDF microporous membranes with highly hydrophobic surface were prepared by a modified NIPS method with a dual coagulation process. The effects of the exposure time on these membranes before being immersed into the coagulation bath and the composition in the coagulation bath on precipitation rate, membrane morphology, membrane hydrophobicity, membrane mechanical property, and membrane performance were studied. The morphologies and hydrophobicities of PVDF microporous membranes were investigated by scanning electron microscopy (SEM) and contact angle (CA) measurement. The precipitation processes were observed by light transmittance measurement. The pore size distribution was determined by liquid permeation technique. PVDF microporous membrane obtained by passing evaporation period of 60 min before being immersed into the water bath showed a high water CA of 122.1 degrees. Using ethanol (EtOH) as coagulation bath, the water CAs of the top surface and bottom surface of the membrane increased to 125.9 and 132.6 degrees, respectively. To further improve PVDF membrane hydrophobicity, a dual coagulation process was used and the mixed solvent (TEP-DMAc) was added into the first coagulation bath for 30 sec. Increase in the TEP-DMAc content led to the change in the morphology type of the membrane, that is, from an asymmetric structure with a dense top surface to a symmetric structure with a skinless top surface, and the pore size distribution widened greatly. By increasing the mass ratio of TEP to DMAc, the denseness of the membrane surface decreased significantly. Adding 60 wt% of TEP-DMAc to the first coagulation bath and the mass ratio of TEP to DMAc was 60: 40, the CA reached to a maximum as high as 136.6 degrees, and PVDF microporous membrane showed a high porosity of 80% and an excellent mechanical property of 3.14MPa tensile strength and 61.79% elongation ratio. Copyright (C) 2009 John Wiley & Sons, Ltd.

Preparation of antimicrobial PVDF and EVOH membranes by grafting quaternary ammonium compounds

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Surface modification of PVDF porous membranes by electron irradiation

Preparation and Characterization of Poly(vinyl Chloride)‐graft‐acrylic Acid Membrane by Electron Beam

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Preparation of antimicrobial poly (ethylene-co-vinyl alcohol) membrane by grafting with N-halamine

Preparation of Symmetric Network PVDF Membranes for Protein Adsorption Via Vapor-Induced Phase Separation

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Study on preparation and performance characteristics of polyvinyl chloride-co-vinyl acetate-modified membranes on the nonwoven fabrics

Improved protein fouling resistance of PVDF membrane grafted with the polyampholyte layers

Preparation of antifouling PVDF membrane via plasma-induced surface zwitterionization

Preparation of Multipurpose Polyvinylidene Fluoride Membranes via a Spray-Coating Strategy Using Waterborne Polymers

Preparation and Characterization of Pvdf Microporous Membrane with Highly Hydrophobic Surface

Antifouling and Antioxidant Properties of PVDF Membrane Modified with Polyethylene Glycol Methacrylate and Propyl Gallate

Antioxidation Performance of Poly(vinyl Alcohol) Modified Poly(vinylidene Fluoride) Membranes

Permanent Antimicrobial Poly(vinylidene Fluoride) Prepared by Chemical Bonding with Poly(hexamethylene Guanidine)

Effect of Coagulation Bath Composition and Temperature on Morphology and Property of Microporous PVDF Hydrophobic Membrane

Simulated preparation and hydration property of a new-generation zwitterionic modified PVDF membrane

Preparation and Characterization Polyvinylidene Fluoride Membranes from Water and Ethanol Coagulants Via in Situ Free Radical Polymerization

Preparation of PVDF Porous Membranes by Using PVDF-g-PVP Powder As an Additive and Their Antifouling Property