Abstract:The studies have established the effect of fillers on the performance of the fireproof coating, the parameters of its swelling under the influence of temperature and inhibition, which makes it possible to influence this process. The effect of fillers on the coefficient of swelling of coatings based on inorganic and organic substances during thermal exposure was investigated. It isproved that it consists in the creation of a layer on the surface of the material that prevents heating to a critical temperature and decomposition of the material. Experimental studies have confirmed that the introduction of titanium oxide and aluminum hydroxide in the amount of 5% contributes to the achievement of the highest value of the coefficient of swelling - up to 47, which is 1.11 times higher than the value of the coefficient of swelling when aluminum hydroxide is introduced, titanium oxide and talc in the amount of 3.3%, 1.12 times higher than the value of the coefficient of swelling when titanium oxide and talc in the amount of 5% were added, and 1.08 times higher than the value of the coefficient of swelling when aluminum hydroxide and talc in the amount of 5% were added. The influence of fillers under the action of high-temperature heat flow on the change in the process of swelling of the fireproof coating was established and the mechanism of the kinetics of the fillers' action, characterized by a decrease in speed and mass loss, was determined. Thus, at 700 °C, the introduction of fillers leads to theformation of refractory compositions that prevent the burnout of the resulting foam coke, which increases the efficiency of fire protection of building structures. On the basis of physicochemical research methods, it is shown that the introduction of a mixture of titanium dioxide and aluminum hydroxide in the amount of 5% each into the composition of the organic-inorganic composition leads to an increase in the coefficient of swelling, orderliness of the structure of the foam coke layer, and an increase in its heat resistance due to the dehydration of mixed titanium-aluminum phosphates.

Differences among SiO2, TiO2, and Ti in the anti-foaming mechanism of chemically bonded silicate coatings

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Preparation of TiO2/SiO2 Composite by Chemical Coating Method

Corrosion behavior of Ti powder enhanced potassium silicate coating with solid NaCl deposit in wet oxygen at 500 °C

The effect of surfactant-free TiO2 surface hydroxyl groups on physicochemical, optical and self-cleaning properties of developed coatings on polycarbonate

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Influence of Additive Silica on the Laser Melting of the Ceramic Coatings

MECHANISM STRUCTURE FORMATION OF A FOAMED FOAM LAYER UNDER THE INFLUENCE OF MINERALS

Effect of SiO2 coating layer morphology on TiH2 gas release characteristic.

Effect of silicon carbide particle size and CaO content on foaming properties during firing and microstructure of porcelain ceramics

The coating process of silica film on TiH2 particles and gas release characteristic

Oxidation Resistance of SiO2 Bonded Coating Formed on Ti–Al–Zr Alloy

Effects of Micron-Sized SiO2 Particles on Performance of Silicone-Acrylic Resin Antifouling Coatings

Preparation of PEO ceramic coating on Ti alloy and its high temperature oxidation resistance

Preparation and Properties of Polysiloxane Coating Modified by Colloidal Silica

Preparation of TiO2/SiO2 Composite Nano-particles for Environmental Function Coatings

The Coating Process of Nano-scale Hydrous Silica Film on TiO2 Particles by Chemical Deposition in Aqueous Solution

Silica–Titania mixed Oxides: Si–O–Ti Connectivity, Coordination of Titanium, and Surface Acidic Properties

Facile Fabrication and Antifogging Test of a Calcination-Free SiO_2 Superhydrophilic Coating

Preparation of a superhydrophobic coating based on polysiloxane modified SiO2 and study on its anti-icing performance

Fabrication of a silane-modified superhydrophobic TiO2–PVDF–FEP coating with scale inhibition performance