Abstract:Abstract The oil-gas bushing has the characteristics of compact structure and small floor area, which can be widely used in various voltage level substations to realize the electrical connection between transformer and high-voltage combined electrical apparatus GIS. At present, the development of oil-gas bushing for 1100kV AC extra high voltage level is the first time. It is necessary to solve the problems of the material development of main insulation core of bushing, the design and optimization of main insulation of core and the current carrying capacity of large current conductor of bushing structural design and other key technologies. This paper focuses on the analysis and calculation of the optimization design of main insulation structure of 1100kV UHV oil-gas bushing. Considering that the end of the oil-gas bushing is connected to the winding side of the transformer and the center conductor of the high-voltage combined electrical appliance in the narrow space, it is necessary to optimize the design of the structure of the fittings at both ends of the bushing to ensure that the electric field distribution is reasonable under the action of high voltage, and that it carries large current without local overheating area. Based on this, three-dimensional finite element simulation model of UHV oil-gas bushing tooling is established, and the main insulation structure of the bushing core is optimized to make its axial and radial field strength meet the control requirements. The topological structure and size of the current carrying structure in the center of the bushing and the voltage equalizing device at both ends are given, and the prototype and supporting tooling structure of the oil-gas casing are developed according to the optimized design structure, and go through various bushing type tests. In this paper, the optimized design and development of the main insulation structure of UHV oil-gas bushing, taking into account processing and installation of transformer outgoing line structure and the GIS electrical connection supporting tooling of the high-voltage combined apparatus, simulating the actual operation environment of the UHV oil-gas bushing with full voltage and full current, and carrying out the long-term performance evaluation test, has good engineering application guidance value.

Insulation characteristics of polyimide film used in liquid nitrogen of compact HTS transformers

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Design of Medium-Voltage High-Frequency Transformers Based on High-Thermal-Conductivity Insulation Material

Design and Optimization of the Insulation of Medium-voltage Medium-frequency Transformers for Solid-state Transformers

An Improved Design Procedure for A 10 Khz, 10 Kw Medium-Frequency Transformer Considering Insulation Breakdown Strength and Structure Optimization

Insulation structure design and electric field simulation of 500 kV isolation energy supply transformer for HVDC breaker

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Effect of Barrier Thickness of Polytetrafluoroethylene on the Direct Current Breakdown Characteristics of Liquid Nitrogen

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

High Voltage Winding Internal Electric Field Shielding Structure for Medium Voltage High Frequency Transformers

Influence of Voltage Waveform and Duty Cycle on Solid Insulation Strength in High Frequency Transformer

Insulation Structure Analysis Of High-Frequency And High-Voltage Rectifier Transformer

Thermal Evaluation Of High-Temperature Insulation System For Liquid-Immersed Transformer

A Novel High Insulation 100 Kw Medium Frequency Transformer

Analysis and Design of Post Insulator of Transmission Line Towards the CRAFT NNBI Test-Bed

Thermal runaway and induced electrical failure of epoxy resin in high‐frequency transformers: Insulation design reference

A High Power 200kW Medium Frequency Transformer With Improved Thermal Management

Study on the Main Inner Insulation of 1100kv UHVAC Oil-gas Bushing and the Structure Optimization Design of Its Fittings

Design of a 200 kW Medium-Frequency Transformer (MFT) With High Insulation Capability

Evaluation of insulation systems for the optimal design of high voltage pulse transformers