Abstract:Hyperbranched polyethylene (HBPE) is a new type of polyethylene materials in addition to low-density polyethylene (LDPE), high-density polyethylene (HDPE), and linear low-density polyethylene (LLDPE). It has dendrimer-like compact globular structures. Due to lack of chain entanglements, it exhibits better solubility and lower viscosity than the other types of polyethylene. HBPE has attracted great attention in the recent years in both academic and industrial researches. However, as polyolefin materials, HBPE suffers from such shortcomings as nonpolar nature and thus lack of functionalities. These shortcomings limit its applications. Grafting of polar molecules such as maleic anhydride (MAH) has been widely adopted in the modification of polyolefins.In this work, HBPE samples having high molecular weight (M-w = 8 x 10(6) g/mol) and high branching density (the number of branches per 1000C = 108) were synthesized by solution polymerization of ethylene with a late transition metal catalyst, namely bi (2, 6-diispropylphenyl) butane diimine nickel dibromide (IBNB) at 45 degrees C and 0.5 MPa. The Ni catalyst is well-known to experience a chain walking mechanism that is responsible for the hyperbranched chain topology. H-1-NMR and C-13-NMR were used to examine the branching density and the type of branches, respectively. It was discovered that the types of branches were mainly methyl (50.54 %) and butyl (20.30%).MAH was grafted onto HBPE through a free radical mechanism. Di-tert amyl peroxide (DTAP) was used as the free radical initiator. However, it was found that the HBPE/MAH/DTAP grafting system experienced severe chain degradation and crosslinking side reactions during the grafting process. N, N-diethyl cinnamamide (DECA) was thus synthesized by the use of cinnamoyl chloride, diethylamine, and triethylamine which was used as an acid-binding reagent. DECA was then used as an inhibitor to suppress the side reactions. The approach was successful and efficient. The gel content in the grafting products was remarkably reduced from 55.38% to 5.15%. The M. was almost doubled in reference to the use of MAH and peroxide DTAP only. The observation suggests that the chain degradation and crosslinking side reactions were dramatically suppressed with the addition of DECA.Compared to the other investigated inhibitors such as styrene (St), N, N-dimethylacetamide (DMAC), 3-(2-furyl) acrylic acid (FAA) and ethyl cinnamate (ECA), DECA was found to be the most effective in suppressing both chain degradation and crosslinking side reactions. We also found that FAA and ECA could effectively suppress the chain degradation in the grafting system, but the grafting system had high gel contents and experienced severe crosslinking. St and DMAC had some effects on inhibiting crosslinking, but there was still small amount of crosslinking. The proposed mechanism is that DECA reacts first with HBPE macroradicals to form stable macroradicals when DECA is added to the grafting system. The latter then reacts (or copolymerizes) with MAH to form MAH-grafted HBPE. Because the formed stable macromolecules contain amide group, both the chain degradation and crosslinking side reactions are effectively suppressed.In general, in the presence of radical initiator, HDPE mainly experiences crosslinking, while polypropylene undergoes chain scission. LDPE and LLDPE have both reactions simultaneously occurring. HBPE is more or less similar to the low-density materials having simultaneous crosslinking and degradation. In the grafting studies, these side reactions need to be controlled. The current work elucidates the grafting mechanisms and provides practical guidance in this regard.

Amination of polypropylene‐g‐(maleic anhydride) using reactive extrusion

GRAFTING OF MALEIC ANHYDRIDE ONTO HYPERBRANCHED POLYETHYLENE AND SUPPRESSION OF CHAIN DEGRADATION AND CROSSLINKING SIDE REACTIONS

Nanoporous Low‐κ Polyimide Films Via Poly(amic Acid)s with Grafted Poly(ethylene Glycol) Side Chains from a Reversible Addition–Fragmentation Chain‐Transfer‐Mediated Process

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Ultrasound Initiated Maleic Anhydride Grafted Onto a Novel Polypropylene Copolymer

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

Kinetics in high-temperature free-radical reactive processing: Grafting maleic anhydride onto polypropylene in the presence of nanoclay-supported peroxide

Elimination and Substitution Compete During Amination of Poly(vinyl chloride) with Ehtylenediamine: XPS Analysis and Approach of Active Site Index

A New Method for Preparing Anhydride Grafted Polypropylene with High Grafting Ratio by Combining Microwave Reaction and Reactive Extrusion

Organic reinforcement of an ethylene propylene diene monomer with the in situ synthesis of a polyimide dispersed phase by reactive extrusion

Melt-photografting polymerization of maleic anhydride onto LDPE film

Grafting of Peroxide-Initiated Maleic Anhydride on Spherical Pe/Pp In-Reactor Blend Granules

Enhanced melt free radical grafting efficiency of polyethylene using a novel redox initiation method

Free radical graft polymerization of hydroxyethyl methacrylate and acrylic acid on polyetherimide membrane surface via redox system to improve anti-fouling and oil resistance performance

Preparation and application of higher poly (alpha-olefin)-g-maleic anhydride

Maleimide immobilized on a PE surface: preparation, characterization and application as a free-radical photoinitiator

Preparation and Characterization of High Melt Strength Polypropylene with Long Chain Branched Structure by the Reactive Extrusion Process

Preparation and Characterization of Maleic Anhydride Grafted High Density Polyethylene Induced by UV Irradiation

Semi-Aromatic Polyether Amide Thermoplastic Elastomer: Nucleophilic Substitution Polymerization and Properties

Polymerization of Meldrum’s Acid and Diisocyanate: an Effective Approach for Preparation of Reactive Polyamides and Polyurethanes

Thermal Decomposition of Amide and Imide Derivatives of Maleated Polyethylene