Abstract:Self-cross-linkable main-chain polybenzoxazines (PBz) could be directly obtained with polymerization of a diamine, a bisphenol compound, and formaldehyde. Two major concerns of preparation of main-chain PBz are gelation in the polymerization system and low molecular weight of the PBz products. In this work, an effective approach to address the issues has been demonstrated with employing a Meldrum's acid-containing diamine (MADA) as a functional monomer. MADA could retard the trimerization of methylol groups and formation of cyclic triazines in the polymerization system through the interaction between MA and methylol groups, so as to prevent gelation occurring in the polymerization system. With the self-protection of the diamine monomers, adjustments of the used solvents have been done to prevent PBz precipitation from the polymerization solution in the duration of reaction and consequently to result in an increase in the molecular weights of the prepared PBz (MW: 12500 Da; inherent viscosity: 0.39 dL g(-1)). Moreover, the MA groups provide additional cross-linking sites to the PBz chains, so as to increase the cross-linking density and enhance the thermal and mechanical properties of the corresponding cross-linked PBz. The MADA-based cross-linked PBz shows good film formability, film flexibility with a near -180 degrees bending, a high glass transition temperature (350 degrees C), and a Young's modulus of 2.26 GPa. The values are superior over the data (T-g: 267 degrees C; Young's modulus: 1.74 GPa) found with the conventional 4,4'-oxydianiline-based cross-linked PBz. Significant advances on both PBz synthesis and cross-linked PBz properties have been demonstrated.

Polymerization of Meldrum’s Acid and Diisocyanate: an Effective Approach for Preparation of Reactive Polyamides and Polyurethanes

Self-polymerization of Meldrum's Acid-Amine Compounds: an Effective Route to Polyamides

Preparation of Meldrum's Acid‐functionalized Polyimides Exhibiting Organo‐soluble, Reactive, Self‐crosslinkable, and Colorless Features

The Michael Addition Reaction of Meldrum's Acid (MA): an Effective Route for the Preparation of Reactive Precursors for MA-based Thermosetting Resins

Thermosetting Resins Based on A Self-Crosslinkable Monomer/Polymer Possessing Meldrum'S Acid Groups

Facile Polymerization of Water and Triple-Bond Based Monomers Toward Functional Polyamides

Meldrum's Acid-Functionalized Bismaleimide, Polyaspartimide and Their Thermally Crosslinked Resins: Synthesis and Properties

Selective reactivity of aromatic amines toward 5-maleimidoisophthalic acid for preparation of polyamides bearing N-phenylmaleimide moieties

Self-crosslinkable Polymers from Furan-Functionalized Meldrum's Acid and Maleimides As Effective Precursors of Free-Standing and Flexible Crosslinked Polymer Films Showing Low Dielectric Constants

A Cocatalytic Effect Between Meldrum's Acid and Benzoxazine Compounds in Preparation of High Performance Thermosetting Resins.

Dynamic Postpolymerization Modification Based on Knoevenagel Adducts of Meldrum's Acid

Dynamic Postpolymerization Modification Based on Knoevenagel Adducts of Meldrum’s Acid

Preparation, Characterization And Selective Solubility Of Diels-Alder Addition Polyimides

Poly(ester amide)s from biomass‐based 3,4‐dihydrocoumarine through Meldrum's acid mediated ketene chemistry

A Self-Protection Effect of Monomers on Preventing Gelation in Synthesis of Main-Chain Polybenzoxazines with High Molecular Weights

Polyether–maleimide‐based Crosslinked Self‐healing Polyurethane with Diels–Alder Bonds

Visible Light-Induced Polymerization to Access Polyamides

Quantifying Chemical Reactions and Interfacial Properties at Buried Polymer/Polymer Interfaces

Manganese Catalysed Dehydrogenative Synthesis of Polyureas from Diformamide and Diamines

Preparation and Modification of Soluble Bismaleimide Oligopolymer

Kinetic Study of Diels–Alder Reaction Involving in Maleimide–furan Compounds and Linear Polyurethane