Abstract:Ternary alloys consisting primarily of uranium, plutonium, and zirconium (U-Pu-Zr) are among the leading candidate fuel systems considered for fast spectrum nuclear reactors. Despite historical operation data from the testing of U-Pu-Zr rods in the Experimental Breeder Reactor-II, considerable uncertainty about the evolution of phases and microstructure across the ternary composition space exists. Due to sluggish kinetics and other difficulties in handling metal actinide specimens, quantitative measurements of phase-transitions in U-Pu-Zr alloys remain sparse in scientific literature, with most investigators reporting either phase-transition temperatures or phase identification data, but not both from the same specimens. The purpose of this paper is to critically compare experimental and calculated phase transition data and correlate with the microstructure and phase characterization data of as-cast and annealed U-Pu-Zr alloys. Phase transition peaks were measured using differential scanning calorimetry in the subsolidus regions (723−948 K) of three ternary U-Pu-Zr alloys with the same zirconium concentration but various U/Pu ratios. Overlapping peaks were deconvoluted using a Frazier-Suzuki peak fitting algorithm, and the critical peak temperatures and enthalpies were calculated. In general, increasing concentrations of Pu were associated with enhanced thermal stability of the body-centered cubic γ phase upon both heating and cooling. Experimental phase transition temperatures in this study tended to agree well with the predictions of the established ternary phase diagrams and other reported phase transition temperatures in literature. Additionally, the TAF-ID thermodynamic database was used to calculate a U-Pu-40 at.% Zr pseudobinary diagram as well as ternary diagrams from 773 −973 K. The equilibrium phase transition temperatures tended to be considerably lower than measured peak temperatures upon both heating and cooling. Recommendations for improving the quality of data in future U-Pu-Zr characterization studies are also discussed.

On the U-Fe-C Isothermal Section at 1100 °C

Molten uranium dioxide structure and dynamics

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Thermodynamic and experimental study of UC powders ignition

Experimental isothermal section of the system Cr-Nb-Ru at 1100 °C

Determining the effects of U/Pu ratio on subsolidus phase transitions in U-Pu-Zr metallic fuel alloys

Phase Stability and Thermal Equation of State of Iron Carbide Fe3C to 245 GPa

Thermal radiative and thermodynamic properties of solid and liquid uranium and plutonium carbides in the visible-near infrared range

Structural stability of β-phase uranium films at extreme temperatures

Computational discovery of novel U-N-C ternary phases as promising accident-tolerant fuels

First-principles study of elastic and thermodynamic properties of UO2, γ-UO3 and α-U3O8

Thermal Equation of State of U$_6$Fe from Experiments and Calculations

Determination of Thermal Expansion, Defect Formation Energy, and Defect-Induced Strain of α-U Via ab Initio Molecular Dynamics

Metastable Phase Formation in the FeCu System by Ion Irradiation and Solid State Interdiffusion

Experimental Partitioning of Uranium Between Liquid Iron Sulfide and Liquid Silicate: Implications for Radioactivity in the Earth’s Core

The Effect of Temperature and Burnup on U-10Zr Metallic Fuel Chemical Interaction with HT-9: a SEM-EDS Study

Fuel-Clad Interactions: Uranium Nitride and Uranium Dioxide with FeCrAl and Ti-Modified Stainless Steel

Experimental investigation of the thermodynamics of Fe-Nb-C austenite and nonstoichiometric niobium and titanium carbides (T = 1273 to 1473 K)

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Dissolution kinetics and thermodynamics of uranium from a boltwoodite ore for nuclear fuel cycle application

Thermally Decomposed Binary Fe–Cr Alloys: Toward a Quantitative Relationship Between Strength and Structure