Abstract:Die filling from a stationary shoe in a vacuum and in the presence of air was numerically, analyzed using an Eulerian-Lagrangian model, which employs a discrete element method (DEM) for the particles and computational fluid dynamics (CFD) for the air with a two-way air-particle interaction coupling term. Monodisperse and polydisperse powder systems have been simulated to explore the effect of the presence of air on the die filling process. For die filling with monodisperse powders, the influences of particle size and density on the flow behavior were explored. The numerical simulations revealed that the presence of air has a significant impact on the powder flow behavior, especially for systems with smaller and/or lighter particles. Flow has been characterized in terms of a dimensionless mass flow rate, and it has been shown that for die filling in a vacuum this is constant. The flow characteristics for die filling in air can be classified into two regimes. There is an air-inert regime in which the particle size and density are sufficiently large that the effect of air flow becomes negligible, and the dimensionless mass flow rate is essentially identical to that obtained for die filling in a vacuum. There is also an air-sensitive regime, for smaller particle sizes and lower particle densities, in which the dimensionless mass flow rate increases as the particle size and density increase. The effects of particle-size distribution and adhesion on the flow behavior have also been investigated. It was found that, in a vacuum, the dimensionless mass flow, rate for polydisperse systems is nearly identical to that for monodisperse systems. In the presence of air, a lower dimensionless mass flow rate is obtained for polydisperse systems compared to monodisperse systems, demonstrating that air effects become more significant. Furthermore, it has been shown that, as expected, the dimensionless mass flow rate decreases as the surface energy increases (i.e., for more cohesive powders). (C) 2008 American Institute of Chemical Engineers AIChE J, 55: 49-62, 2009

Calibration of particle interactions for discrete element modeling of powder flow

Measurement and Simulation Validation of DEM Parameters of Pellet, Sinter and Coke Particles

Simulation of powder transportation in directed energy deposition

DEM simulation of the powder application in powder bed fusion

Experiments and Discrete Element Simulation of the Dosing of Cohesive Powders in a Simplified Geometry

A Coupled Dem/Cfd Analysis of the Effect of Air on Powder Flow During Die Filling

A discrete deformable element approach for the compaction of powder systems

A LB - DF/FD Method for Particle Suspensions

A Coupled DEM/CFD Analysis of Die Filling Process

Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing

Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations

Calibration of DEM simulations for dynamic particulate systems

SIMULATION BASED ON DISCRETE ELEMENT METHOD AND EXPERIMENT ON FLOW AND PACKING BEHAVIOR OF PARTICLES

Calibration of the discrete element method: Strategies for spherical and non-spherical particles

A mechanistic framework for the characterisation of cohesive, frictional and interlocking effects on powder flow behaviour

Numerical Investigation of Funicular Liquid Bridges between Three Spherical Grains in a Bidisperse Particulate System

Discrete Element Modeling of Scraping Process and Quantification of Powder Bed Quality for SLM

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Investigation of flow properties of metal powders from narrow particle size distribution to polydisperse mixtures through an improved Hall-flowmeter

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing

Relevance of inter-particle interaction in directed energy deposition powder stream