Abstract:Purpose The purpose of this paper is to provide theoretical guidance and an experimental basis for a smart anti-corrosion coating of halloysite nanocontainers loaded with benzotriazole (BTA) inhibitors on copper in a marine corrosion environment. Design/methodology/approach In the present study, the smart anti-corrosion coatings of halloysite nanocontainers loaded inhibitors on copper were synthesized by adding BTA inside the halloysite nanocontainers. Then, the halloysite carrier’s surface topography and composition in the halloysite were observed using scanning electron microscopy. After the successful synthesis of the coating, the inhibitor’s physical and chemical properties, as well as the mass change in halloysite, were evaluated in terms of temperature fluctuation and time using thermal gravity analysis (TGA). Finally, electrochemical impedance spectroscopy was used to check the pH selectivity for the self-releasing of BTA out of the nanocontainers. Findings The results indicate that the efficiency of the nanotubes was enhanced by calcination at high temperatures. The thermal gravity analysis by TGA shows that halloysite nanoparticles store inhibitors BTA and there are approximately 37.39 Wt.% BTA loaded in each nanocontainer. The release of the preloaded BTA from the halloysite nanocontainers is pH 7 in a 3.5% NaCl solution. Originality/value The development of a new environmentally safe coating for corrosion protection of metallic surfaces has attracted great interest in material science over the past few years. At present, halloysite nanotubes (HNTs) have become a research hotspot internationally and are widely used in nanocomposites, catalysis, nanofiltration, drug sustained-release and other fields. However, the application of HNT is limited by its modification methods. As the carrier of metal nanocorrosion inhibitor in the Marine corrosive environment, the modification research of HNT still needs to be further studied and improved so as to expand the practical application of HNT in the Marine corrosive environment. In this paper, the modification of HNTs was investigated and observed. Four different modification schemes were used to observe and compare the structural properties of the nanotubes under different conditions so as to provide a theoretical basis for the further loading of HNTs as corrosion inhibitors.

Preparation, anticorrosion and antifouling behavior of halloysite-loaded nanocomposite with CAP and BTA

Modification and corrosion resistance of halloysite carrier with metal nanoinhibitor in marine corrosion environment

Functionalized Ti3c2tx-Based Nanocomposite Coatings for Anticorrosion and Antifouling Applications

Construction of smart halloysite nanocontainers for active long-term anticorrosion of epoxy coatings

Benzotriazole corrosion inhibitor loaded nanocontainer based on g-C3N4 and hollow polyaniline spheres towards enhancing anticorrosion performance of waterborne epoxy coatings

Preparation and anticorrosion properties of BTA@HNTs-GO nanocomposite smart coatings

The new insights towards smart pH-responsive anticorrosion coating based on HNTs carrying synergistic inhibitors: Experimental and molecular simulation

pH-Responsive nanovalves based on encapsulated halloysite for the controlled release of a corrosion inhibitor in epoxy coating

Enhancement of active anti-corrosion properties of waterborne epoxy resin by mussel bionic modified halloysite nanotube

Superhydrophobic Nanocontainers for Passive and Active Corrosion Protection

Inhibitor loaded functional HNTs modified coatings towards corrosion protection in reinforced concrete environment

The controlled in-situ growth of silver-halloysite nanostructure via interaction bonds to reinforce a novel polybenzoxazine composite resin and improve its antifouling and anticorrosion properties

A two-dimensional nanocontainer based on mesoporous polydopamine coated lamellar hydroxyapatite towards anticorrosion reinforcement of waterborne epoxy coatings

Improving the Protection Performance of Waterborne Coatings with a Corrosion Inhibitor Encapsulated in Polyaniline-Modified Halloysite Nanotubes

High barrier and durable self-healing composite coating: Boron nitride combined with cyclodextrin for enhancing the corrosion protection properties of waterborne epoxy coating

Preparation of BTA@PDA/PANI microcapsules and anti-corrosion performance of self-healing epoxy coatings on low carbon steel

Preparation and Synergistic Antifouling Effect of Self-Renewable Coatings Containing Quaternary Ammonium-Functionalized SiO2 Nanoparticles.

Controllable construction of mesoporous silica/2D-COF nanocomposites reinforced epoxy coatings with excellent self-repairing and long-lasting anticorrosion performances

Nanofiber Composite Coating with Self-Healing and Active Anticorrosive Performances

Construction of Bta-Inbuilt Zif-8 Coated with Molybdate-Intercalated Znal-Ldh As Core-Shell Structured Nanocontainers Toward Ph-Responsive Smart Corrosion Protection of Waterborne Epoxy Coating

Preparation of Microcapsules Coating and the Study of Their Bionic Anti-Fouling Performance