Abstract:Purpose The purpose of this paper is to provide theoretical guidance and an experimental basis for a smart anti-corrosion coating of halloysite nanocontainers loaded with benzotriazole (BTA) inhibitors on copper in a marine corrosion environment. Design/methodology/approach In the present study, the smart anti-corrosion coatings of halloysite nanocontainers loaded inhibitors on copper were synthesized by adding BTA inside the halloysite nanocontainers. Then, the halloysite carrier’s surface topography and composition in the halloysite were observed using scanning electron microscopy. After the successful synthesis of the coating, the inhibitor’s physical and chemical properties, as well as the mass change in halloysite, were evaluated in terms of temperature fluctuation and time using thermal gravity analysis (TGA). Finally, electrochemical impedance spectroscopy was used to check the pH selectivity for the self-releasing of BTA out of the nanocontainers. Findings The results indicate that the efficiency of the nanotubes was enhanced by calcination at high temperatures. The thermal gravity analysis by TGA shows that halloysite nanoparticles store inhibitors BTA and there are approximately 37.39 Wt.% BTA loaded in each nanocontainer. The release of the preloaded BTA from the halloysite nanocontainers is pH 7 in a 3.5% NaCl solution. Originality/value The development of a new environmentally safe coating for corrosion protection of metallic surfaces has attracted great interest in material science over the past few years. At present, halloysite nanotubes (HNTs) have become a research hotspot internationally and are widely used in nanocomposites, catalysis, nanofiltration, drug sustained-release and other fields. However, the application of HNT is limited by its modification methods. As the carrier of metal nanocorrosion inhibitor in the Marine corrosive environment, the modification research of HNT still needs to be further studied and improved so as to expand the practical application of HNT in the Marine corrosive environment. In this paper, the modification of HNTs was investigated and observed. Four different modification schemes were used to observe and compare the structural properties of the nanotubes under different conditions so as to provide a theoretical basis for the further loading of HNTs as corrosion inhibitors.

Preparation and anticorrosion properties of BTA@HNTs-GO nanocomposite smart coatings

Difunctional Silicon Dioxide Combined with Graphene Oxide Nanocomposite to Enhance the Anticorrosion Performance of Epoxy Coatings.

Construction of smart halloysite nanocontainers for active long-term anticorrosion of epoxy coatings

Coatings embedded with GO/MOFs nanocontainers having both active and passive protecting properties

Anti-corrosion coatings with active and passive protective performances based on v-COF/GO nanocontainers

Preparation of modified montmorillonite/graphene oxide composites to enhance the anticorrosive performance of epoxy coatings

pH-Responsive nanovalves based on encapsulated halloysite for the controlled release of a corrosion inhibitor in epoxy coating

Hybrid epoxy-SiO2/GO nanosheets anti-corrosive coating for aeronautic aluminum Al6061-T5

A direct one-step synthesis of a smart graphene/silica nanocomposite and its application for improving the acid resistance and corrosion resistance properties of waterborne epoxy coatings

Interfacial assembled mesoporous polydopamine nanoparticles reduced graphene oxide for high performance of waterborne epoxy-based anticorrosive coatings

Inhibitor loaded functional HNTs modified coatings towards corrosion protection in reinforced concrete environment

Corrosion protection coatings embedded with silane-functionalized rGO/SiO2 nanocontainers: Enhancing dispersive and corrosion-inhibitor loading capabilities

The new insights towards smart pH-responsive anticorrosion coating based on HNTs carrying synergistic inhibitors: Experimental and molecular simulation

Preparation and anticorrosion properties of GO‐Ce‐MOF nanocomposite coatings

Preparation of graphene oxide–boron nitride hybrid to reinforce the corrosion protection coating

Corrosion protective mechanism of smart graphene-based self-healing coating on carbon steel

Modification and corrosion resistance of halloysite carrier with metal nanoinhibitor in marine corrosion environment

Synthesis of h-BN modified GO to improve the corrosion resistance of the water-borne epoxy coating for hot-dip galvanized steel

Nano-SiO2 and Silane Coupling Agent Co-Decorated Graphene Oxides with Enhanced Anti-Corrosion Performance of Epoxy Composite Coatings

A Smart Healable Anticorrosion Coating with Enhanced Loading of Benzotriazole Enabled by Ultra-Highly Exfoliated Graphene and Mussel-Inspired Chemistry

Improving the Protection Performance of Waterborne Coatings with a Corrosion Inhibitor Encapsulated in Polyaniline-Modified Halloysite Nanotubes