Abstract:The mechanism of using graphene oxide as a two-dimensional filler to increase the path length of the corrosive medium to the metal surface is limited to improving the corrosion resistance of the coating. This study propose novel dispersion and in-situ crosslinking reaction mechanism for constructing water-based heavy-duty anticorrosive coatings by using graphene oxide (GO) and waterborne epoxy resin (WEP). The results showed that GO can be uniformly dispersed directly into WEP without complex functional modifications. Oxygen-containing functional groups on moleculars structure of GO&WEP co-polymerized with diethylenetriamine (DETA) forming a continuous phase film which improved the density of the coating. Characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal conductivity measurement instrument, pencil hardness tester, adhesion tester, salt spray corrosion test chamber, and electrochemical impedance spectroscopy (EIS) were used to evaluate coating structure and performance properties. The results showed that graphene characteristics enhanced physical properties and anti-corrosion performance of composite coatings. The construction mechanism of the coating is different from that of the current GO modified and dispersed in the coating as a two-dimensional filler to extend the path length of the corrosive medium to the metal surface. The coatings prepared by adding the optimum mass ratio of 0.1–0.2 % GO to WEP have the best physical properties and anti-corrosion properties. When the GO content is 0.2 wt%, the thermal conductivity increases by 86.0 %. After added 0.025 wt% GO, the coating hardness is increased by two grades directly from 2B to HB. With the addition of GO concentration increased to 0.05 wt%, the adhesion is increased from 2 to level 1.When the GO content exceeds 0.05 %, the coating will not bulge off after 4 months of salt water immersion experiment.

Preparation of graphene oxide–boron nitride hybrid to reinforce the corrosion protection coating

Preparation and Properties of GO-SiO2 Anticorrosive Coatings

Synthesis of h-BN modified GO to improve the corrosion resistance of the water-borne epoxy coating for hot-dip galvanized steel

Self-assembled graphene oxide-graphene hybrids for enhancing the corrosion resistance of waterborne epoxy coating

Coatings embedded with GO/MOFs nanocontainers having both active and passive protecting properties

Gallocyanine-Mediated Non-Covalent Functionalization and Exfoliation of H-Bn for Efficient Anticorrosion Reinforcement of Waterborne Epoxy Coating

Difunctional Silicon Dioxide Combined with Graphene Oxide Nanocomposite to Enhance the Anticorrosion Performance of Epoxy Coatings.

Octadecylamine-functionalized hexagonal boron nitride nanosheets toward highly anti-corrosive epoxy composite coatings

Synergistic functionalization of h-BN by mechanical exfoliation and PEI chemical modification for enhancing the corrosion resistance of waterborne epoxy coating

Preparation and Performance Studies of Modified Graphene Oxide/polyaniline Composite Anticorrosive Coatings

Graphene Oxide-Hybridized Waterborne Epoxy Coating for Simultaneous Anticorrosive and Antibiofilm Functions

Corrosion protection coatings embedded with silane-functionalized rGO/SiO2 nanocontainers: Enhancing dispersive and corrosion-inhibitor loading capabilities

Engineering the interface in graphene oxide/epoxy composites using bio-based epoxy-graphene oxide nanomaterial to achieve superior anticorrosion performance

Preparation and anticorrosion properties of BTA@HNTs-GO nanocomposite smart coatings

Graphene oxide–cerium oxide hybrids for enhancement of mechanical properties and corrosion resistance of epoxy coatings

Preparation and Anticorrosive Performance of Waterborne Epoxy Resin Composite Coating with Amino-Modified Graphene Oxide

A Novel Cerium Organic Network Modified Graphene Oxide Prepared Multifunctional Waterborne Epoxy-Based Coating with Excellent Mechanical and Passive/active Anti-Corrosion Properties

“Labyrinthine structure” anticorrosive water-based composite coatings

In-situ crosslinking reaction of graphene oxide & waterborne epoxy resin to construct continuous phase anticorrosive coating

Preparation and Corrosion Resistance of ETEO Modified Graphene Oxide/Epoxy Resin Coating

Effect of cyanate ester and graphene oxide as modifiers on corrosion protection performance of epoxy composite coating in sulfuric acid solution