Abstract:In the realm of non-powder printing additive manufacturing, the removal of supports from enclosed voids has long posed a formidable challenge. In response to this challenge, inspired by the traditional approach of designing either self-supporting or infill-supporting structures, this paper presents a novel topology optimization method that allows for the free choice between the two types of support within same enclosed voids. The infill material not only serves as a support during the additive manufacturing process but also becomes an integral component of the final design, never requiring to be removed. Firstly, a bi-directional nonlinear virtual temperature method (BN-VTM) is introduced to identify enclosed voids. The BN-VTM adds virtual heating material in regions below a predefined temperature threshold and heat-absorbing material in regions exceeding the threshold. This strategy ensures that the maximum temperature within enclosed voids adheres strictly to the specified range, enhancing the precision of enclosed void identification throughout the iterative process. On this basis, by combining the filtering/projection method, an interpolation function for enclosed void structures that encompasses both self-supporting and infill-supporting structures is developed. This function also is applied to identify overhanging interfaces within enclosed voids. Finally, by constraining the overhang angles, the proposed topology optimization method automatically determines whether to design self-supporting structures to achieve steeper boundaries or internal infill support structures within enclosed voids. The problem of minimizing compliance under material volume fraction constraints is investigated, and sensitivity analysis is derived. Several numerical and printing examples illustrate the effectiveness of the proposed method.

Topology optimization of multi-phase shell-infill composite structure for additive manufacturing

Self-supporting Topology Optimization for Additive Manufacturing

Topology Optimisation of Self-Supporting Structures Based on the Multi-Directional Additive Manufacturing Technique

Topology optimization of Shell–Infill structures with enhanced edge-detection and coating thickness control

Spatial-varying multi-phase infill design using density-based topology optimization

Topology optimization of arbitrary-shape multi-phase structure with structured meshes based on a virtual phase method

Thermal-mechanical coupling topology optimization of multi-phase infill structures with a non-gradient porosity optimization method

A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation

Topology Optimization of Multi-Material Structures with Explicitly Graded Interfaces

A Novel Derivative Free Methodology for Multi-Material Topology Optimization Based on Projective Transformations and Boolean Operations

Integration of additive manufacturing process-induced material characteristics into topology optimization

Multiscale topology optimization of biodegradable metal matrix composite structures for additive manufacturing

Topology Optimization of Self-supporting Porous Structures Based on Triply Periodic Minimal Surfaces.

Structural topology optimization of three-dimensional multi-material composite structures with finite deformation

Shell-infill composite structure design based on a hybrid explicit-implicit topology optimization method

Multi-Material Topology Optimization for Spatial-Varying Porous Structures

Shell-infill composite structure design based on a hybrid explicit- implicit topology optimization method

Topology optimization of sandwich structures with solid-porous hybrid infill under geometric constraints

Structural topology optimization for additive manufacturing with free choice of self-supporting and infill-supporting structures

Phase field topology optimisation for 4D printing

Topology optimization including a model of the layer-by-layer additive manufacturing process