Abstract:Abstract Industrial wastewaters are different from sanitary wastewaters, and treatment complications due to their unique characteristics, so biological processes are typically disrupted. High chemical oxygen demand, dye, heavy metals, toxic organic and non-biodegradable compounds present in petroleum industry wastewater. This study intends to optimize the photocatalytic proxone process, utilizing a synthesized ZnO–Fe 3 O 4 nanocatalyst, for petroleum wastewater treatment. The synthesis of ZnO–Fe 3 O 4 was done by air oxidation and layer-by-layer self-assembly method and XRD, SEM, EDAX, FT-IR, BET, DRS, and VSM techniques were used to characterize the catalyst. Central composite design (CCD) method applied to investigated the effect of pH (4–8), reaction time (30–60 min), ozone gas concentration (1–2 mg/L-min), hydrogen peroxide concentration (2–3 mL/L) and the amount of catalyst (1–0.5 g/L) on the process. In the optimal conditions, biological oxygen demand (BOD 5 ) and total petroleum hydrocarbon (TPH) removal, reaction kinetic, and synergistic effect mechanisms on the process were studied. Based on the ANOVA, a quadratic model with R 2 = 0.99, P-Value = 0.0001, and F-Value = 906.87 was proposed to model the process. Based on the model pH = 5.7, ozone concentration = 1.8 mg/L-min, hydrogen peroxide concentration = 2.5 mL/L, reaction time = 56 min, and the catalyst dose = 0.7 g/L were proposed as the optimum condition. According to the model prediction, an efficiency of 85.3% was predicted for the removal of COD. To evaluate the accuracy of the prediction, an experiment was carried out in optimal conditions, and experimentally, a 52% removal efficiency was obtained. Also, at the optimum condition, BOD 5 and TPH removal were 91.1% and 89.7% respectively. The reaction kinetic follows the pseudo-first-order kinetic model (R 2 = 0.98). Also, the results showed that there is a synergistic effect in this process. As an advanced hybrid oxidation process, the photocatalytic proxone process has the capacity to treat petroleum wastewater to an acceptable standard.

Use of Synthetic Iron Oxide-Doped Titanium Dioxide Nanoparticles in Photocatalytic Degradation of BTX from Petroleum Wastewater

Photocatalytic Membrane Reactor for Degradation of Acid Red B Wastewater

Integrated Photocatalytic Oxidation and Adsorption Approach for the Robust Treatment of Refinery Wastewater Using Hybrid TiO2/AC

Application of photocatalytic proxone process for petrochemical wastewater treatment

Recovery of titanium dioxide from catalyst effluents of polyethylene production plants and its application in the photocatalytic treatment of azo dye-containing wastewater

Chemical Oxidation for Oil Separation from Oilfield Produced Water under UV Irradiation Using Titanium Dioxide as a Nano-Photocatalyst by Batch and Continuous Techniques

Sulfur and nitrogen doped -titanium dioxide coated on glass microspheres as a high performance catalyst for removal of naphthalene (C10H8) from aqueous environments using photo oxidation in the presence of visible and sunlight

Performance And Mechanism Of Photocatalytic Toluene Degradation And Catalyst Regeneration By Thermal/Uv Treatment

Evaluation of pollutant removals from oilfield produced water using photocatalysis

Ultrasonic-assisted synthesis of TiO2/MWCNT/Pani nanocomposite: Photocatalyst characterization and optimization of efficient variables in the degradation of benzene via RSM-CCD

Photo-catalytic oxidation of individual and mixture of benzene, toluene and p-xylene

Current trends on dry photocatalytic oxidation technology for BTX removal: Viable light sources and highly efficient photocatalysts

Toluene Degradation by Iron-Doped TS-1 Zeolite Heterogeneous Catalyst Supported in a Bubbling Reactor

Photocatalytic Luminous Textiles for the Treatment of Wastewater Issued from Petroleum Activity: Photocatalytic Process Extrapolation

Synthesis and utilization of titanium dioxide nano particle (TiO2NPs) for photocatalytic degradation of organics

Synthesis of BiOI-TiO2 composite nanoparticles by microemulsion method and study on their photocatalytic activities

Ultra-deep photocatalytic oxidative desulfurization of liquid fuels by Ti@CeO 2 /ZnO nanophotocatalyst under visible light and mild operating conditions

Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst

Application of Ag/TiO2 in photocatalytic degradation of 2,2′,4,4′-tetrabromodiphenyl ether in simulated washing waste containing Triton X-100

TiO2 Photocatalysis for the Transformation of Aromatic Water Pollutants into Fuels

Iron Oxide-Bearing Wastes as Media for Supporting Biodegradation of BTEX