Recovery of titanium dioxide from catalyst effluents of polyethylene production plants and its application in the photocatalytic treatment of azo dye-containing wastewater

Farzad Jani,Seyyed Kamal Afzali,Seyyed Reza Adhamdoust,Saeed Houshmand Moayed,Abdolhannan Sepahi,Reza Rashedi,Reza Bahrampour
DOI: https://doi.org/10.1007/s11144-022-02287-7
2022-09-04
Abstract:This research aims to recover the titanium dioxide (TiO 2 ) from Ziegler–Natta catalyst effluents of polyethylene production plants and its implementation in the photocatalytic treatment of azo dye-containing wastewater. The TiO 2 was obtained through the controlled sol–gel process in combination with calcination and purification. It was characterized by X-ray Fluorescence (XRF), X-ray Diffraction (XRD), scanning electron microscope (SEM), Brunauer–Emmett–Teller (BET), and dynamic light scattering (DLS). The purity of recovered TiO 2 (TiO 2 -R) was 93 wt% based on XRF. The DLS results revealed that the average particle size of TiO 2 -R was 94.1 nm, and the Polydispersity Index (PI) of 0.304. The XRD spectra indicated that the crystalline phase was anatase. The BET outcomes showed that the sample had a specific surface area of 40.64 m 2 /g and a total pore volume of 0.2 cm 3 /g. TiO 2 -R was used for photocatalytic degradation of methylene blue (MB), methylene red (MR), and methylene orange (MO). The individual and interactions effect of the operational conditions, including pH, TiO 2 -R loading, and initial MB concentration, on the MB removal efficiency were evaluated based on response surface methodology (RSM) and the Box-Behnken design method. According to the optimization results, at pH 7.80, the MB initial concentration of 0.019 mmol/dm 3 and TiO 2 -R loading of 0.013 mol/dm 3 , the maximum MB removal efficiency of 97.104% will be accessible. Besides, the typical results at pH 4.5, the TiO 2 -R loading of 0.0125 mol/dm 3 , the airflow of 1000 cm 3 /min, and the azo dye concentration of 0.0313 mmol/dm 3 under UV-C irradiation after 120 min showed a removal efficiency of 94.16, and 80.33% for the MR and MO, respectively.
What problem does this paper attempt to address?