Abstract:Sir, Ragavendra et al. present a technical note focused on the durability of bar coding in complete dentures when subjected to various chemical assaults. The authors designed a protocol where 15 dentures embedded with quick response (QR) codes were exposed to three different acids (hydrochloric, sulfuric, and nitric), concluding that the codes were able to be read up to 33 h after acid treatment. We agree in that this method provides a simple and cheap alternative for denture marking. Also agree in that the behavior of denture marking systems to chemical assaults has not been explored much. However, we believe that the methodology used in this technical note needs to answer some questions that we cannot respond with by only reading the article. The QR codes were printed and laminated, and placed on a depression made on the denture surface where they were covered with self-cure acrylic. Is evident that the laminated codes were not exposed to the acids, and it would be a real contribution in knowing the effect of the acids on the laminated papers already that the behavior of the acrylic to chemical exposure is well known for a long time. The resistance of the bar codes to the acids concluded by the authors cannot be demonstrated with this methodology. In 2005, Mazza et al. (1) published an excellent contribution entitled “Observations on dental structures when placed in contact with acids: experimental studies to aid identification processes”. It is interesting to note that the same three acids, applied on natural teeth (they are the most durable organs) exhibited extremely curious (and so far dissimilar from Ragavendra et al.) results: Teeth were completely dissolved after 12 h of immersion in 65% nitric acid, 14 h in 37% solution of hydrochloric acid, and 90 h in 96% sulfuric acid. Similar findings were published in 2011 by Hartnett et al. (2) who reported complete dissolutions of teeth in 19 h immersed in 31.45% hydrochloric acid, and 10 days immersed in 95–98% sulfuric acid. Those authors concluded that the hydrochloric acid was the most destructive acid also considering that it is readily available to consumers and less expensive than other acids (nitric acid is available for purchase, but is expensive). Mazza et al. refer that since their experiments were initiated to give expert opinions about the possibility of destroying a human body by immersing it in acids, they cannot take into account possible factors present in real-life conditions. The interest of citing the previous reports is not only to compare eventual differences between teeth or dentures exposed to acids (an excellent proposition future), but to expose the major omission of the study proposed by Ragavendra et al.: A correct analysis of behavior to chemical agents inevitably needs the values of concentrations of these to be valued. Without this, the time of expositions is only an anecdotic dada and worse still, the procedure may not be reproduced in any way. Mazza et al. and Hartnett et al. provide valuable information obtained from a rigorous methodology reproducible. Ragavendra et al. only showed an interesting experience, but an incomplete and singularly far from precisely what they offered: a technical note for forensic sciences.

Iron Oxide-Bearing Wastes as Media for Supporting Biodegradation of BTEX

Synthesis of iron-manganese bimetallic materials supported by activated carbon and application of activated persulfate in the degradation of soil contaminated by crude oil

Microbial Aspects of Anaerobic BTEX Degradation.

Indigenous Microorganisms Residing in Oil Sands Tailings Biodegrade Residual Bitumen.

Enhanced MTBE removal in fixed-bed bioreactor with iron-modified carriers: Biofilm structure and microbial community

Study on Gaseous Chlorobenzene Treatment by a Bio-Trickling Filter: Degradation Mechanism and Microbial Community

Commentary on: Ragavendra TR, Mhaske S, Gouraha A, Yuwanathi M, Kamath KP, Saawarn S, Kasetty S. Quick response code in acrylic denture: will it respond when needed? J Forensic Sci 2014;59:514–6.

Anaerobic degradation of a mixture of MtBE, EtBE, TBA, and benzene under different redox conditions

Bioelectrochemical BTEX removal at different voltages: assessment of the degradation and characterization of the microbial communities

Bioaugmentation with Isolated Strains for the Removal of Toxic and Refractory Organics from Coking Wastewater in a Membrane Bioreactor

A Study On Anaerobic Biodegradation Of Btex In Soil

Anaerobic Btex Biodegradation Linked to Nitrate and Sulfate Reduction

Electron acceptors determine the BTEX degradation capacity of anaerobic microbiota via regulating the microbial community

Insights into the mechanism of hydrogen peroxide activation with biochar produced from anaerobically digested residues at different pyrolysis temperatures for the degradation of BTEXS

Ecotoxicity Assessment of Four Oxidizing Agents for Remediation of BTEXs-Contaminated Soil

Use of Synthetic Iron Oxide-Doped Titanium Dioxide Nanoparticles in Photocatalytic Degradation of BTX from Petroleum Wastewater

Chemical and microbial community analysis during aerobic biostimulation assays of non-sulfonated alkyl-benzene-contaminated groundwater

Assessing the Biodegradation of BTEX and Stress Response in a Bio-Permeable Reactive Barrier Using Compound-Specific Isotope Analysis

Mechanisms of biostimulant-enhanced biodegradation of PAHs and BTEX mixed contaminants in soil by native microbial consortium

Coupling of Biostimulation and Bioaugmentation for Enhanced Bioremoval of Chloroethylenes and BTEX from Clayey Soil

Highly efficient degradation of hydrogen sulfide, styrene, and m-xylene in a bio-trickling filter